adversam
What does it have to do with this post subject "If the DAC is the same, how different do CD transports sound?"🙄
If the DAC is the same, how different do CD transports sound?
One interesting topic of discussion here is how audible the differences are between CD players when they are used as transports only — or when they are only transports to begin with.
In other words, in a comparison which keeps the DAC the same, how much difference can be heard between CD transports?
This recent video by Harley Lovegrove of Pearl Acoustics provides one test of this question. It may not be the ultimate test, but he does describe the experimental conditions and informations about the qualifications of the listeners.
He comes to the main conclusion here: https://youtu.be/TAOLGsS27R0?t=1079
The whole video is worth watching, I think.
- ...
- 81 posts total
I dont stream , and i dont use cd transport anymore... Only a battery dac with an internal lossless files bank... Less noise and simpler... I am lucky.. 😊 I transfered all my cd from the last 25 years... I invested in music much more than in my audio system... *I could not do the two... Interesting thread anyway... |
Maybe someone someday can do a deep dive on source to dac issues and come up with some good explanations and examples of what can go wrong. I’m convinced that weird things can go wrong even though the music keeps playing. I’ve heard it myself ; strange and obvious distortion that somehow creeps into the signal chain, and it’s source is in the digital domain. A re-start usually fixes it. I’ve always experienced these anomalies when I’m feeding the digital signal in some kind of daisy chain of devices before it reaches the dac. Some things I think I understand, like when one device is set to 44.1 and another to 48 kHz. You get the playback speed varying all over the place to keep the two devices in sync. Other issues I’ve heard are high distortion, making me think a coil is rubbing. A flute sounds like a kazoo. I’ve also seen video artifacts creep in through fully HDMI connections, where I see a slight ghosting until I unplug and re-plug the HDMI cable. There’s so much processing going on between these devices that opportunities for a corrupt but playable signal can happen. |
knock1Well, if you followed the thread from the beginning, you probably noticed that A LOT was going on regarding opinions on cables. The sense of my reply is: you can change cd transport and have different sounds for the same Dac, for sure, but even with a 3.000$ cd transport, plus related power supplies, and a poor power cord plugged into the Dac you will still loose a lot of potential. I personally think this is a very useful personal experience to share with others. To get the full potential from a decent Dac I would first think of a good power cord than exotic cd transports. |
It will be affected by how clean the digital signal is from the transport to the dac.
Most deniers are oblivious to the fact that the “digital signal” going over a wire from transport to dac is an analog signal representing the digital data. Noise on this analog signal caused by a poor transport or bad cable will infiltrate the dac. better dacs can filter some of the noise but filtering is not perfect because electrically everything inside the transport and dac are connected. Nothing is perfect but some equipment and cables are better than others. |
- 81 posts total