Typically, they will know what they sent you and will send you a matched single tube. Or the voltage (?) of your set will be written on the box your tubes came in… and you can send them the parameter to match.
Bad Tube?
Hello,
I am new to tubes so forgive this question if it seems silly. Last month I picked up a pre-owned Muzishare x7 integrated tube amp. I enjoy the sound very much, and it is functioning fine, but I read that upgrading the stock tubes could improve the amp even more. I purchased a matched quad of Shuguang kt88_Z black treasures power tubes as well as a pair of electro-harmonix 12ux7's and a Gold Lion 12ax7 (I haven't touched the rectifier tube). I dropped my bias to zero on all the power tubes, replaced the tubes, and re-biased the power tubes. They sound much better than the originals immediately. Still detailed but weightier, if that makes sense. My problem is, after 1/2 hr, I noticed audible static from my right channel. Checking the V4 bias meter showed that the voltage was not settling at 40 (needle is fluctuating between 30 and 60). I zeroed out the bias on all the tubes again and after letting everything cool off for a bit, swapped my V4 tube into the V1 position (left channel). Starting the tube up and biasing them all again, I now hear static in the left channel and the V1 bias meter is not stable. I have only 1/2 hr on the tubes. Is that tube bad? or will it settle in? Or did I do something wrong?
Thanks so much for helping a new tube enthusiast out!
Ed
- ...
- 14 posts total
- 14 posts total