The switch doesnot run that warm at all
and thanks for the damping tips.
Update on good Ethernet switch
ASI mentioned before I didnot want to say the brand until I heard the Ethernet switch not only after 300 hours which was recommended having a OX over controlled clock ,
and with what myself always do the weak link on any audio component starts with the stock power cord , for minimal monies the Pangea using Cardas grade 1 copper 6-9s. Awg14 sig,Mk2 , and getting rid of the 50 cent bottle neck fuse I put in a 1.25amp 20mm L ,slow blow synergistic purple fuse these increase fidelity at least 5-7% the switch itself At least 5% if you know the name Jays audio for transports ,his other company LHY Audio the SW8 Ethernet switch for $595 nothing has all this in a nice machined aluminum case , even the uptone ether regen or Sonore deluxe using a with fiber optic which btw lessens the realism imo both were used witha Sbooster2 LPS , ,theSW8 Ethernet switch is a great buy ,and if you add a decent power cord and upgrade the fuse you will be rewarded further , 7 of us reviewed this and 6 out of 7 thought it was a noticeable improvement vs the others there were2 other brands which were more ,that were not even that good and had switch mode pS
- ...
- 125 posts total
@mc1969 , the best ethernet cables I've had are made by Audioquest. |
LHY now has the SW-6. Despite the lower product numbering this sits between the SW-8 and SW-10 and I believe it will even be superior to the later because its not repurposing cheap commercial switch hardware - it's a custom board design. Because the SW-6 is a custom made board the clock is now located right where it needs to be rather than on a daughter board. Also one output has dedicated isolation from the other 4. It has a SPF connection as well if you want to do optical. |
- 125 posts total