Brass screws make a real difference on Dunlavy s ?

Peter, I learned it from above source, Louis at Omega Sound who is as honest a person as there is in audio.
It worked very well on my Omega 3XRS .
Also improved a bit my Rega RS-3, Gallo CL-3 and Totem Model 1 Sigs.
After 45 yrs in audio I'm not much for tweaks , brass screws
are only one I found helpful in a long time.

Upon reflection I did not try them on my Totems, some other one my elderly brain can't recall.

Interesting.

Would seem to be a fairly insignificant difference, but if honest people who have heard hear a difference, then so be it.

Plus brass screws usually look nicer for sure, so that can't hurt.

One other thought. It usually always helps to make sure screws of any kind are tightened securely. that could be part of the change that one would ahve to factor in that could account for at least some portion of the difference if things were not as tight/secure as they should be to start.

My big OHM F5 drivers attach to teh base via wingnuts (not brass). These work loose over time and are easy to tighten. Things always sound better after a good tightening, even with no brass in the picture.

Brasier, I owned Duntech Princess speakers for 19 years, though I no longer have them. The Duntech models do have inserts/machine screws, no idea about DAL models.

Like Rcprince, I found it was beneficial to tighten screws and checked them about once a year. When I did that it was usually the woofers where it made a difference. Never using a torque wrench (!) I simply tightened each one snugly by hand, without trying to bare down a hard as I might.

I do remember reading a recommendation for brass screws but never tried them. Since I kept them 19 years it should be obvious I was pretty happy with their stock performance.

Well, I took your advice and decided to tighten the screws on the SC-V(s)and everything in the HT room ranging from the SC-IV(s) to the SC-I center channel. Some of the screws were very snug to begin with while others took a couple of rotations to tighten to a solid point. Putting on some high rez very familiar music showed the effort to be worthwhile. Not talking about an earth shattering difference, but observable.

Many thanks!!