rocket 88

Just a note. Put the shorter pair on the woofers. If there is a timing issue at all at least the woofers will start first. Typically the speed goes to the high end. Personally I would just run the cables you have to the tweeters and jump down with about 8” of rocket 88. You can even experiment with other jumpers from other companies. Try not to use the factory gold plated metal jumpers. If you do use them connect your speaker cables to the high side. Maybe borrow a pair or buy a returnable pair of Rocket 88s so you can see if you hear a difference and you like that difference. I feel there is better way to spend your money like IsoAcoustics for your speakers or your gear. Especially your digital side. You should prioritize your money to where it makes the most audible impact. I will bet you will make a bigger difference with a better power cord than a second speaker cable. It all starts at the wall. Try before you buy so you’re not going down the dreaded rabbit hole. This hobby gets expensive. 

@deep_333 @hsounds

Well stated, gentlemen. I learned something. Just might prove I’m still “trainable” at my age?

I would just like to add that a manufacturer (I believe it’s AQ) recommends that if you’re going to use those factory jumpers and run full range that you “stagger” the inputs, connecting the positive lead to the highs and the negative to the lows. The science here is well above my pay grade, but thought it was worth sharing.

Waytoomuchstuff is correct about putting the positive and negative on opposite sets of binding posts. A couple more things. You should only do this if the Jumpers match the speaker cable otherwise you get an unusual path and can mess with things a little in the resistance. The other thing is if this is a two way that is ok. If it is a three way or more it is not recommended. I don’t even know if you could hear the difference. The nice thing is if you use the same speaker cables as the jumper you can try several different options. I have had some people tell me to jump up to the high side so the woofers start first and you might calm down the tweeter if need be.