Lumin U2 or Aurender N200

The few times I tried fiber in place of CAT 6 it didn’t work for me.... to lean, and lacking body/tonal density.....there was more "air", and a sense of increased resolution with fiber, however the trade off mentioned above wasn’t worth it.

Cheers...

My fibre and Cisco switch is only 3 weeks old in my system, and I only have 1 set of modules to try :) I know my system right now with fibre into the LPS powered etherREGEN then ethernet into the DAC sounds pretty darn good, many levels better than ethernet direct into the DAC, but I'll remove just the fibre and do cat 6 into the ER and compare. 

Just went back and forth between fibre and cat 7- (its actually a cat 7 cable) both from the Cisco switch into the etherREGEN powered by Plixir BDC. Used Keb Mo - "I was wrong".

Really difficult to hear any difference- I had to go back and forth a dozen times:

Bass pretty much equal, if anything there is a little more bloom with fibre- I don’t find any difference with body- but treble- in this case cymbals/harmonica is a touch more prominent and forward with fibre. Gives the impression it is a little more detailed, more air, but I could see that interpreted as glare.

Doesn’t come across as hardness or glassi-ness though. I’m pretty confident I don’t think I could tell the difference if someone tested me- and this was just one track- more listening required!

edit: if someone was curious optical/transceivers are from AS 

Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m DOM Duplex LC MMF Transceiver Module #11774	2	11774	C$ 9.50	C$ 19.00
	15m (49ft) LC UPC to LC UPC Duplex OM3 Multimode PVC (OFNR) 2.0mm Fiber Optic Patch Cable

@mclinnguy that’s a great test track and a very good recording.
Out of curiosity, what Cat7 cable are you using? That’s between the etherregen and streamer correct?

Between ER and Weiss is an Audio Sensibility Supra cat 8- they modify it by cryo'ing the cable and adding Telegartners- very reasonable price 

AS Supra ethernet

That ethernet cable remained in place. I only swapped the cat 7 from the Cisco switch to the ER- it is 50' $22 one from Monoprice and goes up inside the back wall across the ceiling and down the wall in front of the gear. 

Yes, before you suggest I am now researching Muon stuff :) Pricey for sure!

Actually I recall you having an Eno before also; it didn't work for you?