Burn your power cables in PROPERLY with Haglabs Frycorder


I have thousands of hours on my Nordost Heimdall2 power cables. And I put in new Gigawatt inwall wiring over 12 months ago, so hundreds if not thousands on that.

I now know I (and probably most audiophiles here) never had my power cables or power lines burned in, not even close. Because this cheap $300 product by Hagerman Audio Labs, the Frycroder2, has blown me away with only 18 hours on it so far.

A little box you just plug into the end of each power cable. It creates a series of oscillating waveforms, supposedly it burns in the power line all the way back to the first utility transformer.

Who knows if that's true, but already there is a large reduction in hash and grain, more black background e.t.c all the usual subtle things you get with burn in, but seemingly amplified 10x than normal.

I'm going to give each power cable at least 48hrs, so will take a 2 weeks to do and get a full picture after that, but already at this early stage I am a convert and Jim Hagerman is a genius.

https://www.haglabs.com/collections/break-in-devices/products/frycorder2-power-cord-burn-in-generator

agisthos

I buy so much stuff I don't need and why should I stop now. I'll take a few and give them away as gifts if I don't like them.

I'm still evaluating my grounding box with very expensive connecting wires.

I'm also evaluating some liquid material I put at the end of my cables.

also Evaluating those rubber things you put on tubes.

Also Evaluating vibration pads specially designed to be put on other vibration pads. 

And also evaluating Cable lifters.

Everything works amazing and I am so happy when I see more stuff like this I can buy

@agisthos Thank you for the kind words and testimonial. Cable break-in is one of those things you just need to try for yourself. Easy to do, and I offer a 30-day trial period, so you can return device if it does nothing for you.

From what I’ve deduced over the past 25 years, break-in is not about how much voltage, current, or power you can shove through a wire. If it were, power cords would break themselves in, right? Sorry Refrigerator Guy.

No, I believe it is all about the electrical and magnetic fields generated within the dielectric (insulation between conductors). Think of a cable as a capacitor. You break them in by doing essentially the same thing, exercising the fields, as much as you possibly can. That’s what the original FryKleaner did (generation prior to FryBaby), producing a signal equal to playing a hundred songs at the same time, basically white noise, while also modulating that signal in amplitude for more low frequency content. It also swept that modulation in time such that there was no constant steady-state information. The result sounds a bit like a vintage steam train speeding up and slowing down.

But that’s not all there is to it! We already know large voltage and current do not do the trick, so what is it? I believe it is not the amplitude of the fields that are doing most of the work, but rather how fast these fields are changing in time. That is, frequency. The secret to break-in is high frequency, operating well above the audio band. This is also why I think USB and CAT5 cables tend to break themselves in.

Think of RIAA correction for a minute. It was an attempt to de-emphasize the 6dB per decade slope characteristic of the generator (cartridge), where output voltage (or current) is proportional to velocity. This is exactly what I think is going on with burn-in. It’s all about the rate of change of fields (velocity). So for example, a power cord at 120V and 60Hz (and I don’t care how many amps) does not do much to break-in that cord. Not even thousands of hours. Let’s double that frequency seven times over (2^7 = 128), or roughly 7.7kHz. To me, a 1V signal at 7.7kHz has similar burn-in capability as does the original 120V at 60Hz. If we doubled frequency twelve times (4096 * 60 = 246kHz), we have 32 times more oomph (2^5). This is exactly what my FryCorder can do (FryBaby goes up to 500kHz). You cannot do that with a refrigerator. Fast changing electric and magnetic fields are what work the dielectric, breaking it in faster than music itself.

@hagtech Right on music lover and engineer of really great sounding, innovative and affordable kit. Dinner on me next time i’m on your Island !

The more you spend the better it is. I recommend all aftermarket cable manufactures are wonderful guys. How do you know when the cable manufacture is not telling you the truth?