Sagging power plugs in wall outlet, diy

@erik_squires Thanks…I was thinking the same about the 90 degree plug as the solution.  The locking plugs are interesting but not audiophile quality and only go down to 14 ga.  Also, no explanation and not clear how they actually lock 🤔

@tksteingraber  Good points all.  I almost want to order a plug to see how it works.

For loose power plugs going into components you wrap the connector with a couple wraps of Teflon tape (plumbers tape).  Just the plastic part.  Problem solved.

@goose excellent suggestion and will give it a try.👍

Just get a piece of wood, cut it to length, and place it underneath the PC to release the stress of the weight on the plugs.  It doesn’t matter what outlet you get, the weight of the PC will cause it to droop unless you prop it up with something.