The new Coda S5.5 amplifier: It's a "Petite Beast"!

Hey Everybody,

Just wanted to share that I have tested the S5.5 with another speaker I have in for review. Two points here:

1) I have now tried the S5.5 with 5 very different types of speakers and it drove all them superlatively/effortlessly with great musicality.

2) The new speaker I have in-house for a StereoTimes review is Aric's (AricAudio) first commercial design called the Spectre 12. He has been working on this speaker for over 8 years to get it where it is now. Where it is now is mind blowing! It is large stand mount which weights around 80 pounds, six drivers, front ported, Baltic birch cabinet, is 8 ohms and rated at 96 dB efficiency, and goes down to 30 Hz and up to around 30 KHz because of its ribbon tweeter. I'll be writing a review on the AricAudio two chassis reference 2A3 SET amplifier in conjunction with his new speaker. The point I'm trying to make here is that Aric's speaker sounds wonderful with his own great SET amplifier. However, the S5.5, on these speakers sounds like a SET on steroids, retaining the beautiful harmonics/tonality of the 2A3 tube and adds on the drive and dynamics of solid state high current delivery. The S5.5 and Aric's new speaker is a killer combo! You GON members who own AricAudio tube based gear owe it to yourself to hear these speakers being driven by Aric's own amplifiers.

Teajay

Today marks 3 weeks since my amp order was received by Coda, the wait is killing me.  Maybe next week. 🙏

Have had my S5.5 for about 10 days now and wanted to post my impressions after letting it break in a bit.  I have the S5.5 plugged into an UberBuss with a Revelation Audio Labs silver power cord.  I am using a Lumin T2 streamer going into a Holo Audio Spring 3 KTE DAC.  My Accuphase E-380 integrated amplifier is acting as the pre-amp.  It only has RCA out so that is how it is connecting to the S5.5

Speakers are Spatial Audio M4 Sapphire open baffle (90db, 4Ohm)

Initial thoughts were that the Accuphase had a better mid-range while the S5.5 had a better lower and upper range.  After listening for several days and a lot of listening to both I have changed my opinion slightly.  I feel that the mid-range on both are roughly the same, meaning they are both Excellent!  I would say the Accuphase has good lower and upper ranges and an Excellent mid-range.  The S5.5 is Excellent across all 3 ranges.  Because of this the mid-range in the Accuphase stands out when you listen to it because it is the star of the show.  Not so with the S5.5, the lower range is keeping pace with the mid-range and I would say the upper-range is the star of the show on the S5.5.

If I were to rate on a scale of 1-10 I would rate them like so:

Accuphase - Lower (7) Mid (9) Highs (7.5)

S5.5 - Lower (9) Mid (9) Highs (9.5)

The S5.5 does everything the Accuphase does and then improves upon it.  The background is blacker, more detail and slightly wider and deeper soundstage.  I am extremely pleased with this purchase and would like to thank Terry and everyone else for this thread!

Also wanted to post my findings on comparing the Accuphase E-380 used as a pre-amp vs using a Holo Audio Serene pre-amp.

I am using relatively inexpensive RCA's to connect my E-380 the S5.5.  They are good but not at the same level as the rest of my cabling, but I bought them to test the Accuphase as a pre-amp with the understanding that I would either sell the Accupphase and get dedicated pre-amp and connect via XLR or I would purchase a higher end set of RCA's if I wanted to keep the Accuphase.

My friend brought over his Serene and we fist listened to the Accuphase and then listened to the Serene using the same RCA's.  We found the Serene to be a very good fit with the S5.5 as is the Accuphase.  They both sounded very similar but there were 2 main differences.

1. Using the Serene the bass was quite a bit better.  Faster and more of it.

2. Using the Accuphase the upper range frequencies had more sparkle and sounded a bit better.

I would be happy with either and they both seemed to fit really well with the S5.5.  Then we swapped out the XLR connection on his Serene.  Once we did that there was a huge difference in overall sound quality, clarity, bass, etc.  Everything just got a lot better.  It is worth noting that the RCA's I am using are around $100 where the XLR's we tested are around $2,000.  So, how much of the difference is in the XLR connection vs RCA and how much is due to the cable?  That is the big question.  I tend to think about 80%+ is due to the quality of cable but I am not sure.

I did just borrow a pair of Nordost Heimdall 2 RCA cables from my local hi-fi dealer and will test this weekend with a higher quality pair of RCAs. 

I do not know enough to know if RCA or XLR connection from the pre-amp will yield better sound, but will find out in a little while if a nicer pair of RCA's enhances the sound.

@johnah5

Hey, TJ. Those new Spectre 12 speakers from Aric Audio look really impressive! High quality! In your post you refer to them as a "large stand mount". The Spectre 12’s are very close to the size and weight of a Klipsch Forte 3/4 floor stander. The published dimensions for the Spectre 12 on Aric’s site are 35" x 14" x 13"; is that just for the speaker itself, which I am guessing is the case, or does that published 35" height include the stand as well which accompanies the S-12’s?

Anyway, I am curious on the stands that are provided with the Spectre 12’s. If they are not included in that 35" height, how much higher do the included stands elevate the Spectre 12? And are the stands wider and/or deeper than the speaker itself ? Also, do you hard attach the stand to the speaker, or does the speaker simply rest on the stand? What are the stands made of (metal, wood, other?); if wood,do they match the speaker cabinet?

In your listening tests how are the off-axis highs from the Spectre 12's Ribbon? 

If you have the complete dimensions for the stand itself, please share those with us. There were no photos of the Spectre 12 on its stand on Aric’s website unless I missed them. I am of course assuming the stands are not part of the published Spectre 12 dimensions of 35" x 14" x 13" off Aric’s site. Thanks Teajay! Joe