2. amps-preamps
  3. 189252-128813

Anthem AVM 60 full range front and sub doesn't work

I've noticed that to get the sub to come on, I have to set the crossover in the Anthem... I cannot just leave it OFF..  If I turn the crossover in the bass management OFF, the sub never comes on.  I want to run my fronts full range with the sub..  My AVM 70 does this perfectly.  Am I missing something here?

 

dtximages
erik_squires
16,041 posts
 

See if you have separate crossovers for your L/R and your subwoofer.  If so, set the L/R crossover "frequency" to off, and then set the sub crossover frequency to whatever value you'd like.

dtximages OP
365 posts
 

I did that.. I set the L/R crossover to OFF but the sub never gets a signal.. I have upgraded to the latest firmware too.  As soon as I set the front L/R to 40hz, then the sub gets the signal to turn on.  I've tried several times in different ways and setting the fronts to full range kills any sub signal from the sub outs.

 

oddiofyl's avatar
oddiofyl
3,791 posts
 

Agree, any processor or surround receiver i have used delivers full range to the fronts and no content to the sub when Mains are set to Large and no crossover is applied 

More to discover