D’Agostino Integrateds

By the way , for those who use Qobuz , here is my playlist for more than 4 hours of great music

http://open.qobuz.com/playlist/15614780

it could be due to your interconnect or your speaker wire or both if you're using OFC wire that definitely could be the problem that's the worst wire for audio you could have you should try OCC single crystal wire.

also you might try the Townshend podiums underneath your speakers those things get rid of a lot of problems, the mid b a s s problem could be because the vibrations are going out of the speaker into the floor and back into the speaker again and shaking it causing smearing in the sound stage they're not cheap but best upgrade you'll ever do.

@maxwave Sorry if my thoughts wasted your time.

@creditingkarma You are right.  The YB MK2's don't require 400w mono blocks.  I bought the amps as part of a plan to do a significant remodel that would have given me a much larger listening room and an opportunity to try bigger speakers.  For reasons not related to audio those plans changed.

My current listening room is small.  It's kind of an L shape, 12 x 16, widening to 15 in the rear.  The shape is the result of a bathroom and two doors.  The room is below grade and very solid so the sound right now is great.  It's a very quiet room, <30Db background.  The Estelon's image really well though they are short on deep bass.

So yes, I originally planned to move to bigger speakers.  Plans changed and everything sounds so good right now I'm reluctant to change.  I finally have a turntable with two tonearms and I'm enjoying experiencing different cartridges.

@g9taylor 

I was asking a question about Amp/speaker  possible integration.

My complete set up : 2 Channels  and  Home Theater is over 200K $ 

And I have plenty of time  😉