Watts! How many do we need?


Got a new amp. Accuphase P-4600. It’s great. I love it. 
150 watts into 8 ohms, 300 watts into 4 ohms and it has meters so I can see wattage. Have them set on freeze so I can see the highest wattage during the session.

My Harbeth speakers are not very efficient. Around 86db. Their impedance is an even 6 ohms dipping no lower than 5.8 ohms. 

Playing HiRes dynamic classical recordings  ( Tchaikovsky , Mahler) at room filling volumes I have yet to exceed 1watt.. 

Amps today offer a lot of watts some going to 600 even 1200 watts. Even if you have inefficient speakers with an impedance that dips down to 2 ohms do we need all this wattage or should we be focusing on current instead? 

jfrmusic

Sanders has a vast knowledge I have some of his amps and speakers they are great.  As stated power is volts x amps.its the transients that take alot of watts.its the clipping that causes damage to speakers.it is well known esl take alot of power but big cone speakers do also. Some speakers are efficient that's why the reference 1 watt produces spl sound pressure level. As a standard to compare. There has to be some relationship to reference to be marketable.i have read some high powered amps don't play well at low volume but I have not experienced it. The class d amps are getting better and have alot of watts for lower price.they are put in many speakers these days.i like big speakers because I have the room.the huge watts bring them alive.i have alot of esl and planars from many decades.alot of speakers are putting ribbons in now.some of them have 32 ribbons each and require lots of power.paul mcgowen put a 1k watts each speaker into each of his irs v woffer tower they have 6 each colum.enjoy what you have and the music.stay healthy

Post removed 

@bigtwin Your explanation was super helpful, thank you! It's why it's worth coming here....

Your speakers are not as hard to drive as sensitivity of 85-86 db. You don’t deep under 5-6 ohms. Big speakers like Wilson’s that are dipping into the 1.6-1.5 ohm range need a way more powerful amp even if they have a 91db sensitivity.

Digital metering with a peak hold function is more accurate than physical meters.

P=I squared R or V squared/R It is hard to get away from the fact that current and power are extremely closely related. You know an amp has an adequate power supply if it doubles down to 2 ohms. 

There is no such thing as too much power. How much power is adequate depends on the speaker and listening habits of the individual. Since every 3 dB doubles the power requirement power requirements increase dramatically with volume. To get bass at realistic levels and depth always requires a lot of power especially if room correction is utilized, in the thousands of watts.