Recommend good isolation

For a total investment of less than $10 I find this isolation technique works extremely well. Go to Walmart and buy a few 3 ball packages of Penn racquetballs. Go to their drapery department and buy a package of wood drapery rings with a 1 3/8ths inch opening. Remove the metal screw/clip portion from the drapery ring. Place 4 drapery rings on the self under were the four component corners will be positioned. Put a racquetball in the middle of each ring. Place the component directly on top of the racquetballs. You can easily feel the difference this makes by putting one hand on the component shelf and rapping the shelf underneath it with your other hand. You will likely feel considerable vibration. Now put your hand on top of the component and rap the shelf beneath it with your other hand. You will probably not feel any vibration. Heavier components may require the use of additional balls. If anyone tries this and likes the results I would like to hear from you. Good luck!

Sorbagel, what Grand Prix Audio uses to isolate their shelves!!!! Works great under CDP's and pre's. at very reasonable prices on E-Bay. GPA #3 or #4 cones under the CDP works well also.

Samhar,

Can you give a link to ebay for the Sorbagel. I looked but couldn't find.

Thanks,

Kenobi

Kenbi I'm so sorry I gave the wrong spelling, it's sorbogel!!!!

go to this store;

dang-good-stuff

4 sorbogel hemisphere 2" big audio feet audioquest 30D

is what you want for light equipment and 50D for heavier

On e-bay!!!