Help me build out my first system
Hi All,
New Audiogon member here, been a lurker for some time; thanks for all the tremendous info! I’m in the process of building out my first system and am hoping for some recommendations on streamer/dac and preamp. A friend has been kind enough to set me up with a McCormack DNA-1 (not yet in my possession) and a pair of Focal/JM Labs Electra 926s from a client who wanted to upgrade.
At this point I’m trying to put together two sets of options: First, which components might really make the setup sing, not worrying much about budget (without going too nuts). And second, assuming a budget around $3000-$4000, what’s the best I can do?
The setup will live in a 14’x24’ room, and I’m in the process of building some panels for appropriate room treatment. Tidal is currently my preferred source, but am open to change based on compatibility req’s or being convinced of a better alternative for this application. I’d also like to allow for incorporation of a new turntable down the road.
Am I thinking about this the right way? Thanks for your thoughts
Since you’re just starting out you might consider something like this Auralic Altair:
https://www.usaudiomart.com/details/650106287-auralic-altair-g1/
It combines a Streamer and Dac and can be used as a preamp if needed. That and a good preamp and you’re all set to go. On the preamp front I prefer tubes and honestly these days most tubed preamps are not overly warm. But will improve your sound in terms of both imaging and instrumental color. |
Oh no, that's bad advice. I'm all for multiple dedicated lines - although many believe one should suffice - but a 20A line is the maximum you want to install. Here's a 120VAC 20A receptacle, which will accommodate almost any audio component:
Here's a 30A receptacle. Your gear isn't likely configured for this:
What I do like is derating the line, such as using 8AWG wire for a 20A circuit with a 20A breaker. But using a 20A receptacle with a 30A breaker wouldn't meet code in my state.
|
