Audiomods Is A Great Company

@neonknight No, it is not available yet. A new one is immanent. I think it will be Eclipse drive, not direct, but I do not know that for sure. Next time I talk to Christan I will ask. 

@lewm Correct, a poor man's Dohmann with vacuum clamping and a magnetic thrust bearing. The motor will go right on the MinusK with the rest of the turntable. The fun will be getting it all to balance. I figure the 5T and LT will counterbalance the motor. I'll put the 5T in the normal location. It will just make it on the normal tonearm board.  The LT will go at the front, right corner. It would be much easier to do this with a Kuzma Stabi R, but I really prefer the features of the Sota. The Cosmos has been a revelation in turntable performance with its amazing pitch stability and dead quiet backgrounds. The Millenium/MinusK will not be as nice to use as the MinusK is bouncy. I'm not sure if they have a lock out yet.

the MinusK is bouncy. I'm not sure if they have a lock out yet.
 

@mijostyn : If you’re wondering whether Minus-K has a lockout lever of some sort to freeze the suspension, the answer is no, at least not on the BM-8 models I’ve owned in the past or the slimeline CT-2 I have now. But it’s very easy to bottom out the suspension with the little crank the side, stabilizing your turntable for installing an arm or cartridge.

The fun will be getting it all to balance.

Don;t mean to turn this into a Minus-K thread, but @mijostyn : after using M-Ks for a dozen years on multiple turntables, I found the easiest way to balance is to use an oversized top plate of your choosing, placed on the native top plate. That way you can shift everything en masse, turntable and added top plate, to the point of balance. The added benefit is you can choose something that sounds better. I’ve never loved the sound of my turntables directly on the M-K metal top plate, which is damped but still rings. I mean, no one listens to electron microscopes so M-K doesn't care about that. They're lovely and helpful people but audiophiles are a tiny part of their customer base, an amusing and somewhat confusing breed. Right now I’m using a Panzerholz slab. Being a skilled woodworker, you can no doubt fashion something that will function, look and sound just right.

@wrm57 Thank you for that tip. it sounds like a great idea. My plan was to get everything, now including your top plate, weigh it all together to get the right sized MinusK. Your plate seems like a great device for a constrained layer construct, aluminum alternating with wood would work. 

@mijostyn : yeah, that’s the idea: weigh it all first, including your chosen top plate. They work best near the upper limit of the weight range, like within 10 lbs or so. M-K will do custom ranges for surprisingly little up-charge. Steve might say no at first but if you get him laughing, which isn’t hard, he’ll get his engineers on the job.