Challenged with Going from Integrated system to separates

+ @oddiofyl I use my McIntosh MX120 in Home Theater Bypass mode with my C2300. Works great.

Doesn't McIntosh preamplifier turn off the video display when not using bypass mode?

@soix

here is the Revel subwoofer manual https://www.revelspeakers.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw6c150d87/pdfs/Revel_Performa3_B112V_B110V2_QSG_EN.PDF

Sub has both RCA and XLR, I was hoping I could connect the AV receiver for home theater 🎭 to the RCA and use the XLR for 2 channel audio off of the C12000.

based on my human logic, this should work as opposed to using a Splitter at the Subs . Any thoughts ?

Sub has both RCA and XLR, I was hoping I could connect the AV receiver for home theater 🎭 to the RCA and use the XLR for 2 channel audio off of the C12000.  based on my human logic, this should work as opposed to using a Splitter at the Subs . Any thoughts ?

That’s exactly what I’d do as well and would be optimal.  The only question is if your sub works with both XLR and RCA inputs connected simultaneously — I’d think it would, but the manual doesn’t specifically say it so might be worth checking with Revel on that.  Since you’ll already be using the front L/R preouts from the 7015 into the C12000 you might be able to use the Zone 1 or 2 outs into the sub, which if it works would be the way to go.  If you need/want to use the Subwoofer Out from the 7015 you might need to adjust the crossover on the Revel to “LFE” when doing HT and then reset it back to where it works best for 2-channel when listening in stereo, but hopefully the Zone 1 or 2 outs will work.  Or I suppose you could use a splitter from the front L/R preouts from the 7015 and run connections to both the C12000 and sub that way, and that should work as well if a little less elegant.