Magnepan LRS+ resistors on the tweeters… which?

pureclarity - I don't understand why the Magnepan crossover upgrade is so expensive. I converted my 1.6's to an active electronic crossover, removing the passives, rewiring to the panels to exclude the fuse, using Cardas gold plated copper binding posts and it was less than $3,000 including a used second amp and four new interconnects. What in the world are they using in there?

BTW - I've been fuseless for 15 years. No problems.

LRS owner here. My set up is balanced w/o a resistor.

I 50 Hz high pass the input to My Cary CAD 200 amp driving the Maggies. I use a Rythmic 15 in sealed sub set to 50 Hz. The LRS are 4 feet from the front wall with the tweeters on the inside.

The sound is balanced and full range.

The new crossover in magnepan… any way to generate profit. For me, I’m staying stock until the next upgrade bug.

Putting a resistor on Maggies to solve a HF problem would be a last resort for me.  Placement, toe in or toe out, different amp, tone controls, PEQ, etc., would all be tried first.

I find that the 0.25 ohm resistor has zero impact on detail, sounstage, imaging… from what I’ve read just a very, very gradual roll off from about 800hz up which in my case tames the slight brightness/sibilance in a way I can both live with and afford.