Why I Sold My Aurender N200

@audphile1 I’m no expert on anything, I come here to learn and find things out.

have you considered upgrading your Ethernet cable

It was on your recommendation I went with the Purist Audio Design CAT7 Ethernet Cable (switch to streamer)

have you considered upgrading your interconnects or speaker cables

It was on your recommendation I went with Acoustic Zen Satori speaker cables.

It was on your recommendation I went with these ethernet cables for the rest of my network: Patch Cables

It was on your recommendation I went with the Aurender N200 over the renderer in my DAC.

It was on your recommendation I went with the Briscati over my Gustard R26 and to honest with you with all the money spent on these items, I haven’t really heard much improvement over what I had, hence the sale of the N200. Now. I’m considering selling the M1.

Probably return the Baaske MI1005 too, at least I will get back what I paid for it and not take the hard hit as did with the N200.

Maybe I need to get my ears checked. In the meantime, I think I'm done here. 

Thank you

so Erik, is this item Baaske MI1005 going to provide the protection that you getting from the Everstar or the TrippLite units that you speak of?

There is no power through the ethernet connection only data, so I presume the only reason you are using these are a as surge protector, from lighting strikes and the like. Is this correct?

OP - Yes. The IEC standard is the key part. As far as I know, all the audio Ethernet isolators are essentially these devices without the high voltage testing but rely on very similar isolator components. In the case of high voltage isolation and surge protection it’s not just the components but how you lay them out that matters, and thats what the testing / certification will prove was correct. I have noticed that all the certified isolators tend to be a little physically larger, perhaps due to the layout requirements.

I note that in the diagram the surge protection happens after the isolation, and does not shunt to ground. Seems like a much better situation than any grounding Ethernet surge protector. There’s no risk of a common mode surge becoming differential and hopping the downstream isolation, and in fact seems to convert from differential to common, a good thing, as less likely to pass downstream.

I have about 40’ of Ethernet between my router and home entertainment center. At the end of that I put the EverStar just before the 8 port switch which feeds all my HT components and Roon streamer.  The reason I put it there, despite paranoid surge protection at my data closet is the 40' of cable can act as an antenna and a local strike can induce a surge voltage.  The longer the cable the more voltage could appear.

@navyachts  The question I asked was pretty simple and common. You’re looking for improvements and I asked about the links that make the most difference.

By the way I still use the purist Ethernet cable, N200 and Bricasti after comparing each of these to multiple other choices. I really don’t think I, together with others who provided suggestions, had steered you wrong with any of the recommendations. You got all top flight stuff. But hey if it doesn’t work for you just sell it. Go back to what you had before and be happy. In this hobby there are many ways to skin the cat…