Power cables and power conditioners

Every time I ask a question it costs me more money. LOL. Seriously, I’m not averse to spending money, but I try to spend it wisely. In that regard, I probably should explain a bit more.

I have two systems that sit side by side. For music/2-channel, I have my Eversolo streamer/DAC/preamp > Parasound JC5 amp > Usher Mini 2 Diamonds and Monolith sub. Streamer, amp and sub are plugged into PS Audio PP12 using Ice Age Audio PCs, and are connected with Ice Age Audio interconnects and speaker cables.

Home Theater is: Fios cable box > Marantz AV7706 > Deer Creek Audio 901 Platinum equalizers > Parasound A51 amp > Klipsch and Bose speakers and Monolith sub. The Marantz and Parasound are also plugged into the PP12, but the cable box and equalizers are plugged into the Panamax. Interconnects are also Ice Age Audio, as is the center channel speaker cable, but speaker wires to the Bose are just plain vanilla speaker wires. 

The cable box and equalizers currently have wallwart power supplies. I can swap those out for LPSs, but are there recommendations for moderately priced ones? Maybe in the $200-500 range (each)? My home theater setup isn’t intended to be really hi-fi; just looking for clear sound. I’m really happy with my ‘music system’ as it is

I'll add that whatever you might think the high end power cable does to the electricity coming it, it will be totally undone by the PP12.  the PP12 rectifies the power to DC and the inverts it back to AC.  the quality of the power coming out of the PP12 is 100% a function of quality of the inverter.  The whole point of the PP12 is to be impervious to the poor quality of the incoming power.  With my bent toward physics, I achieve more satisfaction than is really warranted by comparing the shape of the power signal coming in and going out.

Jerry

@mbarrett635 one inexpensive cable that I like on amplifiers is Audience Forte F3. It is better than a 14awg stock cord and I’ve run Pass X260.8 mono amps with these power cords with great results. I would recommend trying this cable before you spend more with the PP12. 

Yes, there are only subjective conclusions in the press, nothing objective I know of.  For example, I have read reviews conclusions that the Audience T series produces better system SQ with the expensive Audience First row power cable.  I will give you MHO.  Theoretically, the power conditioner will provide pure filtered power at the outpur, not requiring an expensive cord. Considering, you have a cable with an appropriate amperage rating for your application, electromagnetic radiation (EM which includes RF) will enter an interconnected system at the weakest shielded point (the weakest link principle).  That is why you should not have inferior cords and cables mixed rotting the same signal path.  So the theory is that you tax the conditioner less by introducing a better quality electrical signal to the conditioner, as indicated by the press and by the manufacturers with vested interest of course.  Practically, when I upgraded my power cords, I found little audible improvement with the cord to conditioner but substantial improvement with the digital, phono pre, and integrated amp cords.   

Apologies for typos and spelling check issues.  Reviews = review. Rotting = in.