Differences in clock cables?


I am wondering if anyone has done any testing, experimenting with different clock cables? Have you found any significant change? I currently have a pair of Oyaide 510 cables which are very nice silver cables.. Most of my interconnect is Wireworld so would getting some Gold Starlight 10's be an improvement or is there little change in clock cables effect on the overall sound? Thanks. 

fthompson251

@lordmelton I took a look at your system, but frankly you have a lot of stuff that I know nothing about. 

Do you have a streamer? a DAC? and a word clock?

Would a word clock help the Bricasti M1S2, or just the Aurender N20?

Digital signal transmission is settled science. The 0's and 1's of the binary code don't care whether the cable costs $10 or $1000.

@thriftyaudio 

I don’t have a word clock, I have a master clock. A 10 MHz master clock is far superior to a word clock, which usually requires two clock cables.None of your equipment has clock inputs, you must have word or master clock inputs to use a clock.

It would be best to have a streamer with a clock and secondly a CD/SACD.

A DAC will not usually benefit from a clock.

Apologies for my system it hasn’t been upgraded for a long time.

The core of my system is Aurender N20 with master clock coupled to a Plixir 12v DC LPS. My DAC is a Musetec MH-005.

I recommend putting a SR fuse in your DAC.

Cybershaft in Japan make good clocks at reasonable prices.

Pasternack.com has a number of cables that are suitable for clock cables.  Don't need to spend  a ton on cables, they have true 75 and 50 ohm cables.  

Wireworld cables are good.  I have a Starlight 8 that is terminated with BNC on one end and RCA for the other.