Why hasnt a turntable manufacturer produced a table with automatic tonearm return/shutoff?

"Seems to me the mere existence of the Little Fwend and vs other tonearm lifters reflects a problem that needs solving. I’m just saying I’m surprised such mechanisms are not incorporated into the initial design of high end turntables along with auto return and shut off."

"I think Ferrari should install roof boxes on all their cars. It seems like the mere existence of third-party roof boxes reflects a problem that needs solving. I'm surprised that roof boxes are not incorporated on all Ferraris. Not least because I want one."

Nothing gets the heart rate up like hearing the same record play when you have stacked records on top.  That means a new record did not drop and is probably barely hanging on waiting to sandwich the cartridge between the two records.  When a record does drop properly there is no scratching or rubbing between the grooved part of the record because they don’t touch; there is a raised bead on the edge of the record and the center of the record is thicker than the playing surface.  However, the spindle hole does become larger over time because the record spins while the spindle is fixed so the rubbing slowly reams out the hole.

@retiredaudioguy 

It pisses me off that pressings from the 60’s and 70’s often have sides 1&4 on one disk and 2&3 on the other - or even worse 1&3 and 2&4. And it gets really crazy with multi disk opera LP sets.

Do you have an example of that, and why would it even be done that way?

1+4 with 2+3 of course makes sense, or 1+6, 2+5 and 3+4 for a three LP set, or even 1+8, 2+7, 3+6, 4+5. I have enough of the 2-LP & 3-LP sets like that, but in my 50+ years of collection I’ve never see a 2-LP record set with 1&3, 2&4. I don’t get the logic of it.

JVC made a high-end DD table that solved all the issues people worry about regarding SQ and automation - the QL-A7. It was equal to or better than the offerings from Technics and Denon (except it lacked the very cool Denon plinths). JVC designed the table so there was no mechanism to interfere with the tonearm's performance while playing the record, and nothing to service. The JVC tonearms were also longer than most, with lower tracking error to better support cartridges using the then new Shibata stylus shape, required to decode CD-4 Quad recordings, and which was then as now, very sensitive to tracking error. You may want to consider finding a good used or rebuilt QL-A7.

If you can spring $300,000 or so for a Wilson Benesch Table One, you will get lots of remote-control features including start and stop.  You will be able to adjust the VTA from your armchair, and remotely adjust the rotational speed in 100ths of an rpm.

To achieve this, it comes with a dedicated network.

Through the GMT® Control APP, users can finely tune various parameters to tailor their listening experience to their preferences. This includes adjusting the speed of the OMEGA Drive to accommodate different record formats, with the ability to fine-tune the speed in incredibly precise increments of 0.01 RPM. Users can also easily start and stop the OMEGA Drive, as well as lift and lower the GRAVITON® Ti Armwand with precision.

Furthermore, the GMT® Control APP enables users to adjust the PIZEO VTA System with remarkable precision, allowing for micro-level adjustments in 1 nanometer steps. This level of control over critical aspects of a turntable system is unprecedented and it legislates that users can achieve optimal performance and playback quality with unparalleled accuracy.

No wonder some authorities think it is a bargain!