Help with this RB300

no offense intended lousyreeds1, but you really seemed to be spinning your wheels and needed a bit of a wakeup. i really just want to see you succeed at this project. we all have needed help to "learn the analog ropes" as it were (and god knows i have only scratched the surface myself) hope you find all the resources you need (online and otherwise) please keep us posted.

Thanks for the continued help, musicdoc and tobias.

It seems that the hole in the old armboard was drilled at exactly 222mm from the spindle, as suggested by Rega. What luck! Now I just need to find some spacers, and I need to figure out how much height I need to add. Tobias, I might contact Rob Doughty. Thanks for the info.

You'll find some info about height at that link to the Vinyl Engine. Good luck, and let us know how things go if you get the chance.

serendipity! (or my second guessing of the advice you received was just plain wrong) either way, the path is clear to mount it up. have you decided on/obtained a cartridge? btw i looked up the table on thevintageknob.org right here looks like a good, sturdy vintage DD. once set up, i bet it will sound VERY decent.

whoops, the link didn't work.

http://www.thevintageknob.org/KENWOOD/KD500/KD500.html