Help with this RB300

You'll find some info about height at that link to the Vinyl Engine. Good luck, and let us know how things go if you get the chance.

serendipity! (or my second guessing of the advice you received was just plain wrong) either way, the path is clear to mount it up. have you decided on/obtained a cartridge? btw i looked up the table on thevintageknob.org right here looks like a good, sturdy vintage DD. once set up, i bet it will sound VERY decent.

whoops, the link didn't work.

http://www.thevintageknob.org/KENWOOD/KD500/KD500.html

Well folks, all I've got to do is align the cartridge. I found a local who will let me borrow his template. I decided not to go with the expensive Rega spacers and just get some stainless steel washers instead. Is there any reason not to do this? It seems to have worked well...

Congratulations, Lousyreeds1 ! Your arm replacement seems to have worked out very well.

When you use the template, remember that although you will be using the cartridge sides as reference points, in fact it is the stylus cantilever you are aligning. If all 3 are parallel, that's perfect, but in practice they are not, sometimes.

There's no reason not to go with ordinary stainless washers. The fewer the better, so if you can get different washers of different thicknesses, that may come in handy.