Just bought a nitty gritty, hear no difference.


Hi folks,

So I bit the bullet and bought a Nitty Gritty Record Doctor III, which is distributed only through Audio Advisor. It's a cheaper version of the 1.0- same functionality, with a slightly more utilitarian design, and $100 cheaper. I've cleaned about 10 records with it, and I hear absolutely no difference between records cleaned with the vacuum machine and those cleaned by my $10 record brush. What's the deal? I'm following the instructions to a T... I'd love to hear your ideas.

Thanks!
128x128lousyreeds1
Thanks for the ideas, everyone. I'm using the fluid and applicator supplied by nitty gritty. I've also tried some DiscDoctor D4+ fluid. No difference. Photon46: as noted before, I've vacuum cleaned a large range of records, from perfect ones with just a bit of dust to really gross ones, though no mold. I'm asking the question because the clicks and pops that were there before have not gone away- that's the problem.

I'm not looking for perfection, just trying to decide whether to return the cleaner. I'd like it to significantly reduce noise beyond what can be accomplished with a brush and fluid, and so far it hasn't done that at all. Will the choice of fluid really make that much of a difference? Shouldn't the vacuum be having an effect regardless of which fluid is used?

Thanks for the continued advice.
When I owned my Nitty Gritty, cleaning results varied greatly, depending on the length of time vacuum was applied. Too often, quick vacuuming leaves the LP partially damp and still contaminated with dissolved solids that later dry into the grooves.

I got a substantial performance increase, especially in residual noise removal, with the Nitty Gritty (and my current VPI cleaning machine as well) when I experimented between 2, 4 and 6 revolutions of vacuuming.

I now use only 6 revolutions or more of vacuum, based on listening tests.

There is no point in going through all the cleaning motions and then leaving stuff behind. I cannot promise this advise will help in your situation but it certainly will not hurt to experiment and requires only an additional 10 or 15 seconds.
Are the clicks & pops from dirt?

Or are they vinyl damage? (cleaners won't help).

bgrazman
Your experience, even with a good cleaning machine, is why so many abandoned vinyl when CD presented a viable alternative. Once a new LP has been played, the pops & ticks get worse with each subsequent playing. The better the analog rig, the more the LP`s defects become apparant, Michael Fremer & a zillion $ worth of turntable, arm & crtrg. not withstanding.
RCM's only get rid of pops if it's dirt/dust. If it's pops because it's been played a lot and the grooves are wearing out, nothing can help that out. A RCM is a must and makes a huge improvement, so can't think of why it wouldn't in your case? hmm did you clean the stylus? Are you putting too much cleaner on. It took me some time to get the routine down. If you use too much or not enough cleaner, you will actually get more pops. I guess maybe you took pretty good care of the records. I also have the RDIII.

good luck I'm sure you'll get it working right.