If you want something a little more 'scientific' get the Cardas LP which is great for set up and break-in and also has a device for setting speed with a regular lightbulb. You should have this LP anyway, the speed control is just a bonus.
Adjusting tt speed on the cheap:any tricks?
Hi
I have a Michell table with HR power supply which has speed adjusting screw on its back.I don't want to spend $100-150 to buy a strobe disc with a strobe light so i'm trying to adjust speed on the cheap.I did some adjusting using a camcorder with a built in stop watch and counted if the table did 33 1/2 turns in a minute.Any other ways to save a buck?Thanks in advance.
I have a Michell table with HR power supply which has speed adjusting screw on its back.I don't want to spend $100-150 to buy a strobe disc with a strobe light so i'm trying to adjust speed on the cheap.I did some adjusting using a camcorder with a built in stop watch and counted if the table did 33 1/2 turns in a minute.Any other ways to save a buck?Thanks in advance.
- ...
- 6 posts total
| Post removed |
you can get a free strobe disc here: http://www.quadesl.com/pdf/strobe.pdf No Stobe light is needed, simply use it under a normal incandescant lamp (60hz - use the corresponding disc) |
- 6 posts total