...agre with Dan_ed. I use a Wet/Dry vac with a modified attachment that I by hand. It really sucks.
;^)
;^)
Record Cleaners / RCMs
I am trying the eBay Groovmaster along with a used Record Doctor. I got it here for $60 plus shipping. I still think records DO need some soaking time, so the Groovmaster will take care of it. Groovmaster I am awaiting delivery of Audio Intelligent cleaners. **** |
I Would suggest that you also look into the Disk Doctors Cleaning Fluids, they are manual as well as can be used with machinces. I personally use multiple processes to help clean the records, as I do have very old records most of them came from the attic of old shops and relailors. I use the Following Steps: 1) Removing the dust, dust grains that can damage the LP surface, so a very soft brush should be used for that. 2)Than I Use the VIP 17 F with VPI stock fluid for the first time. Usually clean each side twice or as need be. 3) Use the Disk Doctor manuls process using their Cleaning fluid and that a distil water wash. 4) Than use the VIP Fluid mixed with 99% Alcohol. The ratio is 80% VPI Fluid and 20% alcohol. Use the VPI 17 F for this as well. 5) On last wash by distil water. 6) Leave the record to dry for about 30 to 45 minutes. Than use a new Sleeve to store it. If I use a new record, I do not do the steps 1 and 2 but the rest of the procedure I follow. Always remember to use an anti static brush befor playing any record, this will enhance the life of your investment both Record and Stylus. I hope this will be help ful and you will feel the difference. Happy Listening |
2nd Update: I previously had the entry level Nitty Gritty RCM and most recently have acquired the VPI model that seems to work much better; there are no longer any more lines of dust on my freshly cleaned records. I have a question to all the RCM owners and the fluid that they use. I have read some posts on this forum regarding the fluids, and as I understand it, the liquid is designed to get into the grooves of the lp to help dissolve the grunge trapped inside. I've noticed that some fluids bead up on the record surface, while others seem to coat the grooves like a big puddle. Am I wrong in assuming that the fluids that form the puddle are better for dislodging the dirt? It just seems a bit strange that fluid manufacturers would intentionally make a liquid that beads up; this doesn't allow the the entire record surface to be covered in liquid and thus doesn't help to dislodge all the dirt on the entire surface. Any comments? calgarian |