Put in a tubed pre-x the rotel receiver. Modwright or TAD 150 signature. Modwright going for $1500 used-TADs, if you can find one $800 used give or take? TAD has phono (SS) but you don't need it, still it is a dang fine pre. Your Cornet is probably better there, at least different. If you find a TAD and pair it with a used Mc DNA-125 or CJ MF2250, you will be amazed and in budget. You would not go wrong with either the TAD or Modwright pre. IMHO if you want to get the best out of the Coronet and your TT you need to run it through a good tubed pre. I am sure there are other good choices in a tubed pre. Another consideration/direction might be Blue Circle's integrated, NSCS I think. Not tubed but sweet none the less.
Where to spend some money?
Would welcome anyone's thoughts on how to spend some money to step up the quality of my vinyl playback. This is by no means a mega buck system, but here is what I have; Rega P-2 with RB-250 and Exact cartridge. I Have installed the Incognito rewire set, machined sub-platter, and an Iron Audio thick acrylic platter. I clean my vinyl with a Nitty Gritty and a carbon brush. The preamp is a Hagerman Cornet and the interconnects are PBJ's. This is fed into a Rotel RB1080 200wpc amp and out to Paradigm Monitor 11 towers. I use the preamp section of a Rotel RX1065 receiver to control processing functions. It does sound pretty good in my opinion, but I know there is more to be had
Where would around $1500.00 to $2000.00 best be spent?
Thanks for your time.
Where would around $1500.00 to $2000.00 best be spent?
Thanks for your time.
- ...
- 10 posts total
- 10 posts total