cartridge output level


Hi all,
This is Marco from Italy, I have a question about how a cart output level relates to volume knob position.

Let me explain: my VdH colibri is rated .45mv@5.7cm/sec, it goes into the mc phono stage of an hovland hp100 tube preamp, no complaints for the sound but the preamp volume knob is often in the 3 o'clock position, and anything below 12 is not enough.

Now this preamp phono stage is quiet enough up to 1 o'clock, above that the tube noise is audible, not to a level to ruin the listening pleasure, but is there.

I would like to be able to play with the volume knob between 10 and 2, the question is, if i could get a new cart, how do I know the correct output level to achieve that goal? I wouldn't want to end up not being able to go beyond 9 o'clock either.

Also, is there a difference in output level at 5.7cm/sec as per VdH spec compared to 5cm/sec of other manufacturers?

I know the simple answer is to try other carts in my setup, but unfortunately that is not an option here.

Any advice for a suitable cart is very much appreciated, I listen to jazz 60%, classical 30%, pop/rock 10%, I like lively dynamic sound with huge soundstage but not dry or too bright.

Thank you all,
Marco
128x128cptaz
Rlawry
Gregm: I am not sure what you are asking,
Oooops, I must have completely confused you -- my post was intended for Cptaz. Sorry! (nice set-up, btw.)
Did you speak with Hovland about possibly increasing the gain in either the phono or line stages? I was able to have this done on an earlier phono stage I had. Sometimes this cannot be done due to limited phono overload. Another thing is the volume control taper, although it probably won't change the tube rush problem. Or even your power amp manufacturer may be able to increase the voltage gain. Just alternatives to increasing your cartridge output, which sounds expensive to me.
Hi Viridian, yes I thought about that, looks like I cannot contact VdH directly as I did with Hovland, the way to go is through the italian importer, I can send the cart back for "retuning" and in the meantime submit this request, it's gonna take a while, I'll let you know.
Hi Gregm, I'm sorry I also don't understand, the stated overload of the Hovland phono stage of 0.9 mv (millivolt) I thought was meant to be the maximum output level of the cartridge, am I wrong here?
Hi Rlawry, looks like increasing the gain in the Hovland is not an option, and the volume taper (I don't know what a taper is, behind the volume knob there's a chunky thing full of resistors) has been designed that way for a reason, according to mr. Crespi. The power amps option sounds interesting though, I didn't know you could increase their gain, does that mean increase power? I'll try to talk to the manufacturer, that should be much easier being Mastersound an italian brand. I wonder though, if I could do that and fix the problem with LPs, woudn't I end up having the opposite problem with CDs, I mean not being able to go beyond 9 o'clock?
Thank you all,
Marco
There are some high quality cartridges out there with a higher output than the Colibre, but, if you like its sound, it is going to be hard to find a suitable alternative (the Colibre is a very dynamic, lively cartridge). A Decca London comes to mind, but it is a very touchy beast (difficult to get it to track correctly).

Since you like the sound, you probably should stick with your set up. Keep in mind that, the tubes that come with the unit are currenly manufactured tubes and pretty mediocre. A friend of mine replaced the tubes in his HP 200 with Amperex Bugleboys for a pretty dramatic improvement in sound.

Also, you might want to have your unit checked out by the dealer or Hovland. That same friend had issues with noise, particularly with LP playback, that turned out to be damage caused by some kind of power surge. I don't know if the Hovland is particularly sensitive, but this does raise an issue.
Hi Larryi, I agree it's not going to be easy to find a suitable alternative to the Colibri, i read something about Decca London and I don't think it's for me, at this time I'm curious to hear about the Clearaudio Titanium (0.8 mv), suggestions are welcome. The tube rolling suggestion is indeed interesting, also Rlawry said something about that, he named Mullards, you Amperex, looks like my options are widening thanks to you guys. I know the stock tubes are mediocre, Hovland don't encourage rolling though, they say the unit has been optimized around those tubes. To their credit, I have to say that I tried putting some telefunken NOS, but i went back to stock tubes because, even though there was a very slight improvement in noise, I felt I lost some depth in soundstage. After that first experiment, I gave up tube rolling, but after your reports maybe I should try harder. I will also make sure the unit is not defective, thank you.