Hello My friend, it's Mark.
I thought I'd post my thoughts-ideas here, for not only you, but also perhaps others who own, or may own a Sutherland PhD in the future.
Some may remember that before, you had an issue with the Unit not wishing to shut down, when you were using the Bluepoint, with 2.5mv of output.
It does appear what you/we sourced the problem to (or at least we think this was what it was) was perhaps an inadequately shielded Cable, and that you were most likely picking up RFI, and keeping the Sutherland PhD awake.
This time it doesn't wake up! (You might have to start doing a final rinse LP rinse my friend with some strong coffee!? lol)
Realistically, I'm no Electronic Engineer, nor exactly know how, or where the Sentry is integrated into the Surtherland, but let me ask you this?
When the Sutherland does finally get up, and running, how is the output (Volume) with the Lyra Helikon compared to when you were running the Bluepoint 2 at roughly 50db of gain on the Sutherland?
What I'm thinking now, with the Helikon, with an output of a much lower .35mv (Or if you have the Helikon SL at .22mv) you possibly may not have the Gain set high enough at the Gain Boards (in other words, increase your gain to the highest setting you have on your Boards to try this) or my friend, you may possibly need the High Gain Boards?
I think I mentioned to you in private email not long ago, that I myself did decide to purchase the High Gain Boards from Elusive Disc (For me in the US, they were $74 Shipped)
Since Elusive Disc is a Sutherland Dealer, and the boss Bob Bantz quickly, and cheerfully answers his emails, from customers, he might be the best, and easiest person to get ahold of to see what he thinks, or can find out about this issue.
As you know, I myself didn't immediately have a need for the High Gain Boards since I'm running a Benz HO Glider, but thought that one day (Hopefully soon), I might have the need if upgrading to a Low Output MC like your Helikon, and figured I'd buy them now, while they were still readily available.
I'll try emailing Bob Bantz for you my friend. He'll reply soon, he's a great guy. I hope this helps, and we get you up, and running again quickly! Mark
I thought I'd post my thoughts-ideas here, for not only you, but also perhaps others who own, or may own a Sutherland PhD in the future.
Some may remember that before, you had an issue with the Unit not wishing to shut down, when you were using the Bluepoint, with 2.5mv of output.
It does appear what you/we sourced the problem to (or at least we think this was what it was) was perhaps an inadequately shielded Cable, and that you were most likely picking up RFI, and keeping the Sutherland PhD awake.
This time it doesn't wake up! (You might have to start doing a final rinse LP rinse my friend with some strong coffee!? lol)
Realistically, I'm no Electronic Engineer, nor exactly know how, or where the Sentry is integrated into the Surtherland, but let me ask you this?
When the Sutherland does finally get up, and running, how is the output (Volume) with the Lyra Helikon compared to when you were running the Bluepoint 2 at roughly 50db of gain on the Sutherland?
What I'm thinking now, with the Helikon, with an output of a much lower .35mv (Or if you have the Helikon SL at .22mv) you possibly may not have the Gain set high enough at the Gain Boards (in other words, increase your gain to the highest setting you have on your Boards to try this) or my friend, you may possibly need the High Gain Boards?
I think I mentioned to you in private email not long ago, that I myself did decide to purchase the High Gain Boards from Elusive Disc (For me in the US, they were $74 Shipped)
Since Elusive Disc is a Sutherland Dealer, and the boss Bob Bantz quickly, and cheerfully answers his emails, from customers, he might be the best, and easiest person to get ahold of to see what he thinks, or can find out about this issue.
As you know, I myself didn't immediately have a need for the High Gain Boards since I'm running a Benz HO Glider, but thought that one day (Hopefully soon), I might have the need if upgrading to a Low Output MC like your Helikon, and figured I'd buy them now, while they were still readily available.
I'll try emailing Bob Bantz for you my friend. He'll reply soon, he's a great guy. I hope this helps, and we get you up, and running again quickly! Mark