Arm choices for Thorens TD 150 MKll AB


I am looking to replace the original tonearm on my Thorens TD125. Can anyone suggest an inexpensive arm that will perform better than the stock arm? I am thinking that fairly light arms, such as those that would work on the LP12 would probably be good in this application. Thanks for all of the help.

Marty Kohn
Portland, OR
128x128viridian
I'd contact Artisan Fidelity and ask them for arm suggestions. Just look at their work modifying and restoring TD125's. Nicest TD125's I have ever seen. www.artisanfidelity.com They even get rid of the old 125 suspension and go with a non suspended high mass setup.

Hi Viridian

Thanks for sharing. Your story definitely gave me some help and I hope it will help others. I'll be checking the sites you mention for Thorens information. You are right though from looking at various sites yesterday there is a great divide as to whether or not an Rega RB250/251 or other arms are a good match for vintage Thorens tables.

Ever since I saw a pretty sweet Thorens 125 MkII on that show Storage Wars I've been taken in by the older Thorens TTs. I'm starting to do some research now while I'm enjoying my current TT set-up.

Thanks again.
Hi Jeremy72

I didn't see your post when I was responding to Viridian's. The Thorens tables by Artisan Fidelity are VERY nice. I'll give them a shout when I'm ready.
Another low cost option: Jelco.
Last I checked there was an ebay seller pushing nos SA-370H models for ~$300.00

I put together a TD150 using one of these. Very good. The arm is versatile. Medium mass. Could be used with either MM or MC cart of choice. The wiring harness on it looked pretty decent. Add to that a Sumiko HS-12 headshell to complete it.

-Steve
I did the heater hose mode to my TD150, and mounted an RB250 with no problem. The stock plinth of the TD150 was definitely the weak link.

David