Benz help


Question...Just got my first MC and semi-naked cantilever in a benz micro H2. I set the tracking force, and I'm just a little worried as the angle of the cantilever changes quite a bit from its "resting" state. Does this happen with all of them, or does it need to play at it's "resting state" angle. I hope this makes some sense.
pablo16
My Ebony rides low to the record as well, but never scrapes the back end of the cartridge...the styus is very small and black and is very hard to see. After careful listening, I was amazed to find that the cartridge'a best performance (huge soundspace, midrange clarity, solid low, great depth) was with nearly no lowering of the back end of the arm. I would say the arm is about 3 mm down from perfect horizontal. I'm guessing that your cartridge is fine, but needs to be raised.
Thanks Stringreen, I'm going to raise it some today and see how it works out. I'm probably pretty close to 3mm down from horizontal myself. I will also take some better measurements today as well.

Thanks Pied as well. I keep reading it's b/w 1.8 and 2.2. I'll toy around with these today as well
I don't think you'll find many large stylii.

Even fewer are black.

You never know.
Eyeballing parallel is difficult even for the keenest observer.

Here is an easy method to ensure you start there. You'll need 2 items.
1. A very small (1") bubble level. Home Depot or your local hardware store for about $1.
2. A useless record album. I find Madonna, Donnie Osmond, or Barry Manilow work very well.

Now, drill a very small hole anyplace in the first 1/3 of the record album. Actually it can be drilled anywhere on the record but I find it more convenient with the hole close to the front. The hole must be large enough for the stylus to fit in so when the tonearm is lowered, the weight is born by the cartridge's body.

After you've lowered the tonearm into the hole and the cartridge body is supporting VTF, gently place your bubble level on the headshell. Assuming the cartridge is perpendicular to the headshell, you have a fairly accurate starting point.

As a safeguard it's a good idea to disable the anti-skating mechanism so there is no later force in play.

Good luck.