K&K phono stage

The K&K is the quietest phono stage I have heard in my system. I bought mine used so I did not have to build it. They occasionally pop up here. Kevin Carter will build it for you as well if you buy one new.

Mine has the DaCT volume control which I had disabled. When I purchased it the phono stage already had the lower cost Cardas cap upgrade, but not the Black Gate/front end upgrade. I sent it in for the Black Gate/front end upgrade and this made a nice improvement. I also had Kevin take the MC 47k ohm setting and customize it so I can plug and play any resistors to fine tune the load. Overall I believe the only thing lacking in my version versus the newer version is the Mundorf caps, which require the newer and larger circuit board to accommodate them. Mine also used 6N1P tubes but I believe Kevin can change the circuit to accommodate 6N23P tubes which is part of the 6922/6DJ8 family. Makes for more tube swapping options if that is what you prefer.

This phono stage is similar (not exact) to the Art Audio Vinyl Reference in build as Kevin designed that phono stage as well. It is well worth the asking price new and a bargain at used prices.

I have listened to it and it does sound wonderful. I gave it serious consideration but when it came down to it, didn't trust myself with a soldering iron. Of course, I think you can get Kevin to build it for you at an additional cost.

I ended up going with a EE Minimax Phono which is excellent. There are numerous reviews around and you can check it out on morningstaraudio.com

Mike
Good luck!

Building the K and K Phono Stage was a great experience for me and I would highly recomend it to anyone. The unit sounds fantastic and is a bargain considering what a comparable unit would cost. I am a first-time kit builder and was apprehensive about taking on such a project. When the kit arrived and I opened the box it certainly looked overwhelming to me at the time; however, I decided to give it a go and have been listening with a big grin on my face ever sense! Kevin's directions are very good and he includes a CD with pictures to nurse you along and through the process. I set myself up on a dedicated table with my labtop and looked at the pictures as I proceeded with the project. I made a couple of calls to Kevin along the way and he put me right back on track and was very helpful. I can't say enough good things about the help and service Kevin gives. I highly recommend you pick up a good soldering station (about $150 or so) at your electronics store and give it a go. It took me about 26 hrs total to assemble and was told that was pretty good for a first time builder. The more you work on the unit it becomes addictive or at least did for me. Again, highly recomended for first timers or experienced kit builders and the sound is "to die for".
Good luck!
Capeman