Help,Allaerts or Transfiguration

The super fine coil windings of my "Orpheus" is the main reason(aside from not really needed,with this cartridge)that I sold my Flux Buster demag unit.I too remember reading about the sensitive nature of the Allaerts,but I'd bet many of the top tier cartridges today must be considered similarly.Just a hunch.
Btw,Larry,I found the Temper-v to be quite dynamic.My pal owns a Titan-i,which I LOVE(btw),and I did not get the impression that the Temper-v missed dynamics or slam.Not polite to me,but my phonostage has 75 db of gain.Yet...the Orpheus IS in another league TOTALLY from the Temper-v(which I loved,and would have held onto longer had the importer not been SUCH a nice guy,in giving me the old pricing,so I HAD too move fast).
From what MF stated about the Allaerts(I believe Raul loaned him his MC2 Finish for the review.....and BTW WHERE IS RAUL THESE DAYS??...I hope all is well!!!!!)it was on the polite side,and was recommended with acoustical music,or small ensemble pieces,for best results.That was only what I read,so it is meaningless if there are those owners who "know better".
I have owned four different generations of Transfiguration cartridges(before that four generations of Koetsus,hmm).Each generation of "TRANNYS" was decidedly better than the last,but none was so decidedly superior to the last generation as the Orpheus!!STUPENDOUS!!!!
One important point about the Transfiguration line,as I have friends who have owned more than me...."You cannot kill them".They are like an old Honda!!They will perform "like new" for way longer than one would think.Both I and a friend had the original Temper for eight years.The ONLY reason I moved up,from there,was a "sweetheart deal" on the next generation.NO service problems,over 9 different cartridges,between us(and we were clutzes at times)!!!!!THAT should say something!
Best to all,and a "healthy, happy" holiday season!

If you use an SUT and you want to end up with a load of 845 ohms, you will need to use an SUT with a turns ration of 1:10 giving you 20db of gain in addition to that of your phono stage which should be at least 40dB. The resulting 60dB of gain might be enough depending on your listening habits, overall gain of your system and sensitivity of your speakers. You will then have to change the input load resistors in the phono stage from 47k to 84.5k in order to end up with an 845 ohm load.

Wow,Its great to see so many thoughtful comments.
I have a Temper V and find it to be far superior to the Benz Ruby it replaced.The output is on the lower side but my phono stage's gain is 73db and i experience the same results as Sirspeedy,dynamic with slam.I heard the Orpheus but cant comment on it.It just happened to be used when i was listening to a preamp at a dealership.I did think it was the best preamp I have ever heard but the cartridge could have more to do with it then i thought.
i haven't heard the Allaerts,but the importer is a first class guy.
I hope this helps.Good luck with your decision

The Allaerts carts have a range, some of which are more sensitive to loading, VTF and require high gain phonos.

The one which is less sensitive to these factors and yet still sounds very good is the MC1B, which has 0.5mv output. I believe that price-wise, it is also in the same ball park as the Temper was. IMO this is the sweet spot in the Allaerts range. Of course as you go up the line, you get more refinement, but at a much higher cost. YMMV.

Oem
I have used/owned three Allaerts cartridges including the Mc2 Finish gold that I am now using.
I have never experienced any breakdowns using these cartridges and feel that the Allaerts range is very special indeed.
I too heard that the higher up models in the range do not play Rock music so well?
This however I have found to be utter nonsense,on my RockV/Phantom TT the Allaerts has amazed me on ANY kind of musical programme I can throw at it.
If you can accommodate a cartridge like the finish,my guess is that you will be extremely satisfied.
I know I am,And as for Mr framers review.........
Terry