2. analog
  3. 1204087493

Technics SL1200MK2 Cartridge Discussion

Hi,

I'd like to have a thread on cartridges that work with the Technics SL1200MK series tables.

I want to buy a Technics SL1210MK2 (the new black version from Musicians Friend) and need a cartridge recommendation. I am using a Musical Fidelity A308CR preamp that has MM/MC capability. My amps are Bryston 7B ST's and I have a pair of B&W Signature 800's on the way to replace my N801's. The MF Preamp is rolled off on top and the system is very listenable for long lengths of time. I'd describe it as detailed, but not too bright.

I really want to try the Technics table as it is relaible and inexpensive ($400 shipped or less for a used table if I go the ebay route). Please do not try to talk me into a different table. I had a VPI Scout and Dynavector 20x (High output) that I sold because I just wasn't using it. I'd like to keep this cheap so that I have decent TT available when and if I want to use it.

What can you recommed for a cart? I'd like to keep $160 to $200 as a max and stay lower if possible. Here is what I am considering:

Denon 103 (not the R)
Denon 110
Denon 160

Audio Technica 440 MLa

Shure M97xe

I do not know what carts work well with the Technics tonearm. I know that it is light and some threads recommend a Sumiko headshell for the Denons. What do I need to know here before buying a table and cart.

Thanks.
tigerwoodkhorns
perfectionist
197 posts
 

03-13-08: Solman989
Interesting tip on the Mothers product Perfectionist. Have you tried it on your M5G yet?

Yes. I have treated both decks (only the visable area's of course). While both look great, the M5G looks richer with the metalflake finish. Trust me, this is a no brainer; it is a great product and will make the deck look more "finished," expensive, and RICH. It cost about $5 at the autoparts store. If anyone is worried about this, try a test area out of sight first. It is the best rubber product I have found and can even be used on flat to matte finishes. I have no affilliation with Mothers...
edo_musica
113 posts
 
03-14-08: Tigerwoodkhorns: ....I went from my music server and of course the difference is big. The music just has more resolution and body to it. I'm really glad that I didn't give up on vinyl and went for the SL1210. It should have been my first stop.
I agree that vinyl is very nice B-U-T the availability of music on vinyl is not equal to CD for new music....I listen to a lot of new music. As of recently, I have both formats. my GF said..."They still make albums of new releases?" I answered, "Sort of..."
drubin
3,285 posts
 
You'll notice the Audiogon analog Big Guns never get involved in these Technics discussion threads...
I wish they would, but I don't read anything into it. Likely they have not given a serious audition to the Technics.
tigerwoodkhorns OP
130 posts
 
You'll notice the Audiogon analog Big Guns never get involved in these Technics discussion threads...

I wish they would, but I don't read anything into it. Likely they have not given a serious audition to the Technics.

Be careful what you wish for. This thread has 80 replies and good information is flowing. Go read some threads on high end gear. Most fall apart about half way through and just turn into an argument where each side needs to show the other how superior they are (which offers little information on the equipment).

I'm pretty sure that the Big Guns would explain that you are not hearing what you think that you are hearing, the Technics is junk because it is a "DJ table" (without any other explanation or technical info) and that you will not hear a decent table until you spend "at least $3000 or more" (and that is from a thread that I read before buying mine).
maril555
619 posts
 
Thank you all guys for your input. Now I feel even more confident putting Shelter 501 MK II on mine.
Still, I didn't get any answers regarding a "right" protractor to use with Technics arm.
I understand there will be significant difference b/w overhang, using Technics supplied tool (that's what Kevin
of KAB using himself), and some aftermarket protractors.
More to discover