vintage turntables?

Dual of Germany made some great turntables during the 1970s and early 1980s.

Any of them will work very well. The best of best vintage Duals are the 1209, 1219, 1229, CS-5000, CS-7000, any 700 series.

What many do not know is that the RCA plug wires on the 1209/19/29 are actually connected inside the player to RCA jacks. So it is very easy to upgrade from the standard lamp cord RCA plugs they came with. It makes a huge difference.

"I bought a new SOTA Cosmos mk3, had it upgraded to a mk4. It still couldn't hold a steady pitch compared to Technics SL1210MG5 (a current turntable in production) for 1/10 the price."
Youve mentioned this in several posts in the last few weeks.
It should be pointed out to people unfamiliar with Sota that your experience with your cosmos was truly rare. Having owned almost all the decks in there line up for many years and having discourse with many Sota owners I would comment that Ive never heard of or had any speed problems with their decks. Its unfortunate that you had a bad experience and I share your enthusiasm for technics decks but your experience was remote and in fact could happen with any deck as a matter of fact I can show you a 1200 mk 2 with speed drift, it happens. Im not inditing technics for what I know is an isolated occurrence. I can also say with assurance that after spending many hours comparing technics decks to the Sota that although the technics are remarkable machines they are not in the same league sonically as the Sota.
Just an alternate point of view

Right on, Rccc!

James1969 does have a valid point regardless of other comments. True, his experience with the Sota may have not been typical of the brand, but his comments do bear some merit.

Listening tests alone do not offer enough resolution.

If you really want to see how a DD quartz lock table compares to a belt drive, you will need a NAB broadcast test disc and an HP frequency counter.

First you'll find that many belt drive tables are off speed; just a bit; and usually on the fast side, seldom on the slow side. A 10Khz tone will playback at a frequency somewhat higher.

secondly, observe the pitch stability or tone frequency deviation from the targeted value. Variation is ubstantially less on a DD quartz table, be it Technics, Sony or Denon, etc.

Happy listening.

I have an old Denon, AC DD that works well in a second system after I puttied the platter underside to stop the ringing. Has a Black Widow tonearm, w damping. Late 70s vintage. Needs a high compliance cartridge.

Also bought an old SOTA Sapphire 3, non vacuum w original Well-Tempered tonearm. Sounds great. Very quiet. Live sounding.

Get your SOTA fixed. The unit is so simple that this can't be a big deal. Might just be grease on the belt or other drive. Could be oxidation on the speed pots, or a loose/bad connection somewhere in the speed control.

That Technics should not even be mentioned on this site. Strictly DJ fare. DC Direct drive. With all of those DC pulses and other coupled motor noise, it is unlistenable on a ref or near ref system. Made for a different purpose.