tt surface noise reduce or tolerate?

You can experience virtually no surface noise while listening to vinyl. I have many LPs that are silent. They are clean and I keep them that way. Not by cleaning over and over but by handling them and storing them correctly. This yields good results. Cleaning LPs that have surface noise does improve noise as stated above. However you will not be able to remove scratches. If you have a favorite selection with scratches you can most likely get another copy on E Bay or new if its been re-released.

On the other hand, I have many CDs that are unlistenable due to compression and/or hiss. Obtaining, cleaning, and taking care of your LPs will give you enjoyable results.

I have found several things are important to significantly reduce LP surface noise:

1) make the cartridge track. The tone arm, the cartridge, the setup, the platter pad and proper grounding all play vital roles.

2) a quality phono preamp with zero feedback. I have found that phono sections that employ feedback will also exacerbate ticks and pops. Tube preamps that employ feedback may be more noisy than transistor preamps, but they will make less ticks and pops. Tube preamps without loop feedback will make the least.

The items of number one are things that can cause the cartridge to momentarily mistrack if not attended to. Mistracking can be the difference between a record seeming to be somewhat worn, when it is not, or a record seeming to be noisy when in fact it is quiet, were it simply played back competently.

The item of number two if not attended to will be an added layer of crackle. This is due to the propagation delay present in the phono circuits, being exacerbated by the loop feedback. Small ticks and pops that may well have been masked will suddenly be displayed in relief.

Once these things are taken care of, and as long as the LPs are in good reasonable condition, ticks and pops will be far less prominent- you may find that your friends are assuming that you are playing CDs when its really an LP playing.

I am one of those who say that vinyl can be almost as quiet as CD, however, and this is crucial....you must reread Plato's advice above. I have a Benz also, and indeed it is quiet - nearly no hiss on the vast majority of LP's. When the occasion pop, scratch, etc. sounds, it is on a different plane than the music. The music extends deep beyond the wall where the speakers are, and the clicks, pops, etc. are in front of the speakers. It is easy to disregard those sounds.

I will work on the suggestions above thanks....

I will note however that the dartzeel preamp has no feedback so the issue is not the preamp.

the lp that I was suprised to hear surface noise was a brand new lp from radiohead "in rainbows" So the issue is not cleaning the lp either.

I will try working on the tonearm/stylus suggestions to improve the situation.

Has anyone heard the above lp without any surface noise? there is a version that is double lp and plays at 45 rpm but I have the more common version which is just ol 33 lp.