Mint Tractor

When I checked the alignment, so that the stylus was exactly on the line at the farthest point from the spindle, it was ahead of the curved line of the Mint about 1/2 mm at the closest point..near the spindle. Even though it seemed only a very small difference, I went ahead with the adjustments. Yes, the directions are very clear, however it is a tedious task, Adjustments are very small, and these old eyes were struggling. With the protractor a lighted magnifier is included, and I opted for the 10X Peak loupe. I have a work table in the garage with lots of light (very much needed)and a 100 LED flashlight (very glad I had that). I find glasses very helpful for reading, however when I removed the glasses and used the lighted magnifier, I found that I never needed the 10X loupe. The procedure took about 2 1/2 hours, going slowly and as accurately as I could. I lucked out in that I didn't have to adjust the cartridge for section "B" since my Benz Ebony LP has a square face, and my careful setting was absolutely correct for section B. That would have required me to redo section A again. Anyway, I certainly didn't think that my original setting was very far off, (I checked it with the VPI tool before I began using the Mint to be assured I didn't screw up the original setting. Yes that was right on. When I got finished with the Mint, and put the record on, I was floored at the improvement. I could tell there was going to be something good, just as the stylus touched the record, and all that "air" blossomed into the room. The biggest improvement I heard if I could pick out one thing was the silence between the notes. This allowed a much cleaner presentation of everything. Willie Nelson's guitar...you could hear the pick snapping the string, and then the vibration of the instrument in response to that. The improvements in sound extended from the beginning of the LP to the end. Sung S's were good before, but now have a realism that it didn't have before. Separation of instruments enable one to follow each instrument individually..the instruments aren't attached to each other as they were before. It was thrilling. The singer was clearly directly between the 2 speakers...no bleeding to the sides. I found this to be no small bump. I encourage everyone to send their 100 dollars to Singapore ...it IS worth the trouble and money. I thought my turntable was good before...wow. My wife couldn't believe such an improvement could come of such a small adjustment.

Congrats there, Stringreen. What you describe in increased performance sounds very much like what I heard when I first used the MintLP protractor. The reason is very, very simple. Yip has not invented new math, or new curves, or anything else. He has just given us a more precise target.

I agree. Using this protractor correctly is time consuming and something of a pain in the arse. Yip will tell you that even with how much you have improved things you can still get it better if you keep working at it. He's a mad man! :-)

Stingreen
I believe you are spot on. Its tedious work at best but worth every cent. The biggest revelation IMHO are the jet black inky silences from which the music now erupts. My jaw dropped(believe me this is not a cliche) last night listening to Shelby Lynne - Just a little lovin.The improvement in my vinyl setup post Mint is spectacular.
Thank you Yip.

Stringreen,
I'm glad to hear you're happy with your results. Downunder beat me to the punch with what he said about different verses wrong. The Mint and VPI methods may not agree but it doesn't mean the VPI is "wrong". As I understand it, no matter how you align the cartridge there will be two null points in the arc it subtends. Different alignment methods simply bias where these will fall to minimize distortion at all the other points along the arc. That's why alignment is largely a matter of taste. The Mint method satisfies most who try it which is why I think it's worth a try. I also think Yip provides a more precise tool for acheiving his method than Harry provides for his. I'm anxious to get mine in the mail and give it a try. Meanwhile, I'm glad to hear there's another satisfied customer out there.

Stringreen,

The Mint protractor certainly is a pain to use, but oh so rewarding. Incidentally, Yip told me he uses a "custom" version himself that he wouldn't dare market since the line pitch is about a third smaller than what we're using. He does however report that it is even better than the stock model. Personally, I couldn't imagine that. BTW, Yip is located in Hong Kong (so there's no confusion).

Folks, I urge you to try a GOOD arc-based protractor custom cut for your arm. You'll scratch your head wondering why you didn't try it sooner. I know some folks stick tenaciously to their "universal" alignment protractors, figuring they are close enough. The difference is akin to watching a Quasar console from the 70's vs. a nice HD plasma display...you'll get a picture on both, but one is certainly a more immersive experience than the other.

Good listening,

-Richard