2. analog
  3. 1228934026

Subsonic Rumble Solutions

I know many of you have tried to address this issue. Short of buying or building a subsonic filter (that will/may negatively affect your transparency) - what methods reduce subsonics (meaning the pumping of woofers and subs when a record is playing)?

My system:
I have a DIY VPI Aries clone with a 1" thick Corian plinth, a Moerch DP6 tonearm and Dynavector 20X-H cartridge. This sits on a maple shelf. The shelf sits on squash balls. The balls sit on another maple board floating in a 3" deep sand box. All this on a rack spiked to a cement floor. The phono stage is a Hagerman Trumpet (no built in subsonic filter and very wide bandwidth). I use the 1 piece Delrin clamp on the TT. Yes, I clean records thoroughly and there are no obvious warps, especially after being clamped.

So my isolation is very good - no thumps or thwacks on the rack coming through the speakers. But if I turn the sub on I get that extra low end pumping on some records that hurts my ears. Mostly I leave the sub off when playing vinyl, but I would like to use it if possible.

There was some brief discussion of this on Albert Porter's system thread. I'm hoping to get more answers here.

So ... what methods have you tried to reduce subsonics that you have found effective?

Thanks,
Bob
ptmconsulting
ptmconsulting OP
1,000 posts
 
I tend to agree with you Mapman. The less I have to put in the signal path the better I feel about it and the better the transparency/musicality. I would far prefer to find a mechanical solution that doesn't alter the rest of the sound, if possible.

If not, I could still be happy with my rig the way it is. This is not a burning issue, but just an investigation into options and potential solutions.

And in this economy I am less likely to get itchy fingers and spend $ on a trial and error kit that has zero resale value (unless, of course, I DO get itchy fingers after the holidays and need a project to keep me busy).
mapman's avatar
mapman
22,465 posts
 
Ptmconsulting,

It hasn't been a burning issue for me either. It is what it is. You either live with it or there are ways to deal with it both physical (clamps, new records, CDs instead) or via signal processing (filters, etc.).

On the signal processing front, when it comes to dealing with complex signal processing issues like this, technically, a lot more can be done in the digital domain than in the analog, but it is a complex undertaking and not one I would recommend for the uninspired.
ptmconsulting OP
1,000 posts
 
And why, in God's name, would one ever run a beautiful analogue signal from a turntable through anything digital, unless they were forced to upon pain of being drawn and quartered? :-)

I think I'll open a bottle of wine tonight and listen to something nice on the old-TT.

Enjoy,
Bob
mapman's avatar
mapman
22,465 posts
 
Ptmconsulting,

Not me, but I just thought it ironic that technically the most practical way to clean up a messy analog signal off a turntable were one so inclined might be to convert it to digital first before doing the processing.

The horror! The horror!

Still, DCS and other companies do some truly magical things in the digital domain!

Cheers!
eldartford
4,262 posts
 
Ptmconsulting... Your "beautiful analogue signal" has probably been generated out of a digital mixing consile :-(
More to discover