Hi,
there we go, as Almarg says:
>>> on what I recall reading from way back when, VTA/SRA needs to be set for it with the arm **considerably down** (i.e. down at the pivot end). <<<
The same I had presumed, and then I was just going to post what Raul had to say about the same cart:
>>>... only the Grace Ruby and F9E and Sonus Gold Blue likes a **negative VTA** <<<
So there we are, and as suggested, that "2M Red" wants **POSITIVE** VTA, a pretty different setting from your old Grace Ruby.
Now for Viridian's comment: ... have to call 'Colombo' on this one.
OK, that Grace might be 'a bit long in the tooth' also as it was mentioned.
Furthermore, a top of the line (1980) Empire S1000 ZE/X, and plenty others used aluminium cantilevers -- AND even their 'nude' options often used just a dab of bonding on top.
That '2M Red' is made by people the must have learned just maybe a bit the last 30 years, that THEY make MM carts also, is that fair to suggest?
So, Dfelkai just before all wind up in a panic, move your arm first to level, and then add 2 or 3mm by going higher and try to find your (new) sweet spot.
I'd be blasted if that cart can't get going that way.
Greetings,
Axel
there we go, as Almarg says:
>>> on what I recall reading from way back when, VTA/SRA needs to be set for it with the arm **considerably down** (i.e. down at the pivot end). <<<
The same I had presumed, and then I was just going to post what Raul had to say about the same cart:
>>>... only the Grace Ruby and F9E and Sonus Gold Blue likes a **negative VTA** <<<
So there we are, and as suggested, that "2M Red" wants **POSITIVE** VTA, a pretty different setting from your old Grace Ruby.
Now for Viridian's comment: ... have to call 'Colombo' on this one.
OK, that Grace might be 'a bit long in the tooth' also as it was mentioned.
Furthermore, a top of the line (1980) Empire S1000 ZE/X, and plenty others used aluminium cantilevers -- AND even their 'nude' options often used just a dab of bonding on top.
That '2M Red' is made by people the must have learned just maybe a bit the last 30 years, that THEY make MM carts also, is that fair to suggest?
So, Dfelkai just before all wind up in a panic, move your arm first to level, and then add 2 or 3mm by going higher and try to find your (new) sweet spot.
I'd be blasted if that cart can't get going that way.
Greetings,
Axel