Direct Drive turntables

Had them all from Linn to Lenco, to Technics and Teres rim drive and my own observation comes down to balancing acoustic isolation of the whole deck and arm , with speed constancy and reducing bearing / plinth noise transmitted back through the vinyl. Probably not enough work has been done on cause and efect of different mats.

For me (emphasis on the "for me") has been on the obvious superior performance of air bearing decks as a major step up in performance over anything else, DD. Rim or belt in overall balance.

Rim drives give slam, belts give body and weight, DD give air and transients - but air bearings ........ the truth!

Steve

lots of sound logic (pun intended) in these posts. the last 2, from Teres and Radical Steve, ring true with me.

i'm a direct drive 'preferrer'....and also enjoy what a good idler can do for musical enjoyment with it's added 'spice'. i've heard many belt-driven tt's that play music wonderfully (but could be improved with well executed dd). so really it all can be good according to execution.

Teres' point about ranking sonic performance (belt -> rim/idler -> dd) and difficulty of execution as the motor gets closer to the 'music' sounds right, as does Radicalsteve's point about 'air bearings' and 'heroic' over-the-top solutions to minimizing the noise and resonance that also echo my personal experience.

i have the Dobbins Garrard 301 as well as the Dobbins Technics SP-10 Mk3. compared to belt drives in my experience there is a certain continuousness and sure-footedness on peaks that even very good belt drives cannot match. the high performance belt drives are good in these areas, but just not as good. these characterisitics live in the timing of the music and are not to be denied. when a piano or stringed instrument is properly recorded idlers and dd have valuable advantages.

then there is noise and resonance control. my direct drive Rockport has the eddy current true cogless motor with an air bearing. it has the 55 pound platter. then there is the active air suspension, the linear tracking air bearing arm, and the vaccuum hold down. you take the direct drive advantages executed to the extreme, and eliminate the noise. now you are at the edge of what is possible.

maybe belt-drives that have some of these other advantages have their own form of magic, but if i had to choose my priorities as one moves up the food chain......direct drive or idler (maybe rim) would come first before belts with air bearings. the timing of music seems most critical to the enjoyment level (my personal perspective--YMMV).

Agree with Mike Lavigne and Teres, I've owned a lot of tables since my Thorens TD124 back in 1965 and my return to rim drive and discovery of "excellence" in direct drive has moved me completely away from belts.

Many belt drives like the air bearing Walker Proscenium Black Diamond with air bearing linear track arm can certainly provide state of the art performance. I lived with mine for about a decade, evolving from Basis Debut Gold MK5 with Air Tangent 10B and before that the Versa Dynamics. Each one provided tremendous performance, I have fond memories of having owned these.

When I ventured into my Lenco project in 2004, although the inexpensive arm and moving magnet cartridge were no match for my Walker Proscenium, there was absolute magic in the drive, timing and pace of music from the Lenco, so much so that we laughed out loud in surprise almost every time we played it.

Of course the Walker beat the Lenco in so many other ways I eventually sold it and moved on.

After that, each time I heard a Garrard 301 or Lenco I knew something was missing and eventually decided to give the Technics SP10 MK2 a run. What followed was a procession of experiments that led me to the Technics MK3 which I believe is one of the most speed accurate turntables ever made and all that remained was deal with noise, isolation and power supply.

Odd that in the end I wound up spending more money on the Technics than I sold my Walker for, but I'm completely happy.

Well I have to put in my 2 cents for my DD table. A Kenwood KD-600, with an SME III tonearm and a VDH MM1 cartridge. Still going strong after some 20 years. I did replace the cartridge (had an Adcom MM) but nothing else. Sounds great with my older and newer LP's.

Radicalsteve, if you include oil-pressure bearing in the same group as air-bearing I would agree with your conclusion (while I would direct slam, air and physical weight to other circumstances than the mere drive principle.