Cartridge for the JMW 10.5i


I've been looking for a cartridge to replace my Shelter 501 which I never really liked neither on the JMW 9 Signature nor the JMW 10.5i. It sounds better on the latter though with 3 grams added mass... Nevertheless, no matter what I do I can't get rid of some graininess and sibilance on some LPs (not only SH but new as well) and I simply refuse not to listen to my record collection because of this.

Also, in my system Shelter 501 sounds as if there were three separate layers of frequencies that don't mix really well because the midband was a bit thinner, although when the recording is good (let's say MoFi Aimee Mann How Am I Different...) there's nothing wrong with it and it's excellent.

I'm looking for a warm sounding cartridge that will be a good tracker and one that will serve vocals and winds/brass and acoustic instruments well.

I was looking at the Dynavector (from XX2 to DV-1), ZYX (Fuji - 4D), Transfiguration Phoenix, Koetsu Rosewood.
I was suggested to consider Soundsmith and Lyra as well...

Will my tonearm be able to optimize any of those cartridges or should I look somewhere else...
128x128janhavjar
I have heard both the Dynavector XX-2 and XV-1s with the JMW 10.5i on both an Aries 1 and Aries 3 VPI table. I own the Dyna XV-1s.

The Dynas are an absolute perfect match for the 10.5i. The sound is detailed yet warm and dynamic. Not a hint of brightness or edge in my system. Feel free to email me and we can discuss more details and info about the carts. From the sound you are describing you want, the Dynas are definitely the way to go.

Several people that own the 10.5i tonearm use Dyna for the synergism.
I have a Aries 3 with the 10.5i and it's a nice match , very smooth with no distortion and plenty of air. The XV-1s is the way to go if you can afford it. I got better sound from my Aries when I put a granite surface plate under it.
For the money I think the 10.5i is excellent !
I'm thinking of getting the Mint tonearm protractor , if you want to sell yours let me know.

Abill
I second Philb7777 and Abill; the XV-1s on my VPI HR-X with JMW 12.7 is hard to beat. Absolutely neutral, fantastic resolution, silky smooth highs... whatever you dream of. Of course, you'll need a first rate phono stage.
Don't be closefisted here at the very beginning of the reproduction chain: What is lost here cannot be recovered, even not by megabuck amps and speakers.
As it seems I'll dig a hole in the bank account and go for XV-1s... That way, I think I'll end up with a good cartridge and if for any reason I'm not happy with it (though a lot of comments about the synergy of Dynavectors and JMWs suggest otherwise) I'll change the tonearm and kill the upgrade bug once and for all... Or at least, for a few years :)
Either Benz or Dyna cartridges are perfect matches for the 10.5 aluminum arm....the Shelters, Denons, etc. should be used with the new stainless steel arm. I am using a Benz Ebony LP with great success with my 10.5i. I like the sound of the Benz better than the Dyna XV-!s that I have in another arm, and use the Benz more often. I think this is probably system dependent. I set up my arm/cartridge both with the VPI supplied device, and a MINT...the Mint sounds better. Maybe I was more careful with the Mint, I don't know, but am just reporting. The arm can be used with damping...I find that just a smidge of damping improves the sound. I have heard systems with the Dyna and "Audiofiel" approved arms, and like my system better. That is not to say they were the same components, however I don't hear anything from my 10.5i that would make me change arms. All of this is to say, that my system works for me with my components and my ears. I have never had anyone who has heard my system criticize it, but maybe all who come to my house are just nice people.