benz micro mc3 set up question

I paid $250 for a complete rebuild not just a retip and it took 3 months. I will listen for a while then compare to the xv-1 on my other table and let you know. The service was great - I will use Soundsmith again.

Before sending for re-tipping, perhaps check a few other things first. Have you done a really good visual inspection of the Stylus to insure that it is indeed clean?

If not, search the archives, and read Doug Deacon's use of the MrClean Magic Eraser. Doug has claimed to resucitate many a Cartridge that was originally thought to be bad, and in need of re-tipping.

Is your gain possibly too hot? Too much gain can cause problems with distortion.

Are you certain you have properly aligned this Cartridge? What have you used to align with, and are you sure it has been done correctly?

VTF could possibly be too heavy? Maybe try dropping VTF to 1.9g. Then go from there.

Lastly, is it possible some of these records you are using, have groove damage, and/or are not properly cleaned? Mark

Does a new cartridge which is less flexible do more wear on an lp until broken in? Should it played on just certain disposable type lp/s for 50 hours first? Or does it not matter.

Dear Ct0517,

I'm not so sure that a tight cantilever suspension would be detrimental, but in another forum, somebody made a claim about all cartridges, and a possible issue.

This is of course some food for thought, I am unsure that it is totally factual, but it does sound plausible to me.

Somebody like Cartridge Designer of Lyra Cartridges, Jonathan Carr could perhaps confirm this as fact?

What I have read, that when a Cartridge is brand new, and has not yet broken in, that there could be some possible very minor azimuth mis-alignment of the Stylus in relation to the Record's Groove? And that after a period of time, the Cartridge's Cantilver, and Suspension will begin to alter slightly, and take on a slightly different set in regards to proper Azimuth alignment.

It is probably why some of the gurus who go beyond many's abilities, choose to set Azimuth via electric Multimeter, or other program, rather than relying upon eyesight.

It makes sense, and I'm thinking with lesser Alignment Methods, that yes, some possible damage to the Record's Groove could be occuring until full break in occurs.

Perhaps not exactly the beat thread to veer off on another tangent with this discussion, but I think all would agree the high importance of correct Azimuth.

I would love to hear other's thoughts about this? Mark