2. analog
  3. 1266449203

My New Manely Steelhead

I just received my new audiogon Manley Steelhead preamp. I let it warm up and I checked the tubes to make sure they were seated properly. I put it into the rack and turned it on. Lights are always a good sign. I turn the knob to MM and 47K for my cartridge Grado The Statement. The only settings I know to change. I played it for a couple hours thinking this sounds dry analytical. It did not have any life. I switched from a ARC PH3 and I was missing the romance of the PH3. The Manley does top to bottom better but lifeless. I looked at the Manely thinking what am I going to do. Sell it, but I just bought it. Then I noticed the gain setting was on 65. I changed it to 55 and immediately the sound stage grows wider and the music comes alive. Wow I just wasted 2 hours. The PH3 is now going. What a great unit. I hope nobody else makes the same mistake.
coxhaus
apachef1
164 posts
 
Tube rolling never ends. I tried some Tele's 6922 and no real significant change It seems the 5687 are the key tubes to roll into the Manley Hold out for the Tungsol black plates from the late 40's Simply the best in the Manley

The 6922/6dj8 Bugles Seimans Tele's and so on will be better than the stock tubes but from one tube to another I'm not sure there is any real significant change. So I did stop with the Bugle Boy's, I have a good supply of them.

TheSteelhead is a tweakers dream!
lloydc's avatar
lloydc
751 posts
 
despite its low output, the Statement is not like a moving coil, and is incompatible with mc transformers such as those in the Steelhead. The PH3 and the Steelhead have almost enough gain (without engaging the mc transformers, in the case of the Steelhead) for the low ouptput Grados, but not quite, unless (I suppose) you have a really sensitive amp. Finding a good phono pre for the Grados is not easy. I would be interested to hear what people who have solved this issue are using.
coxhaus OP
231 posts
 
Is there a better phono preamp for the Grado Statment?

I was looking and I could not find any Tungsol black plates quads, only pairs. Do they have to be ultra low noise like the 6922?
rgurney
279 posts
 
The V2 can use the 7044 or the 5687 in the output buffers. Can anyone generalize and state how the 5687 differs in sound compared to the 7044 tube (regardless of brand) in the V2? Thanks for your comments.
More to discover