With my Rega P3-24/Exact 2 combination (Rega cartridge with Rega arm) .....NO SPACERS REQUIRED ! My dealer advises that spacers will be needed if I switch to a "taller" cartridge (Benz, Dynavector, etc.)
Spacers for Rega P3
Am I the only one who thinks that the tonearm in the Rega P3 is mounted a bit too low ?
It seems that it needs to climb a few mm on its way to the record.
The solution is very simple: a spacer... but wouldn't Rega use a spacer on the stock P3 if one was needed ?
Should I add a spacer ? What size ? 2mm or 4 mm ?
It seems that it needs to climb a few mm on its way to the record.
The solution is very simple: a spacer... but wouldn't Rega use a spacer on the stock P3 if one was needed ?
Should I add a spacer ? What size ? 2mm or 4 mm ?
- ...
- 14 posts total
| Post removed |
The photo of my cartridge again: http://picasaweb.google.com/100352153551466589742/UntitledAlbum#5500335753236383426 |
- 14 posts total