Albertporter only needs 50

Maxgain, remove your outlets and clean the copper wire ends with brasso, flitz or wenol. I cleaned the wire clamps inside the recepticle also, along with the blade contacts, use a toothpick and pipecleaners. You will be amazed at all the black grunge that will be removed. After using the metal cleaner, wipe down with alcohol or de-ox-it to remove all metal cleaner residue. This should keep you busy while you wait for the funds for your new speakers to come rolling in! I have had the Porter Plugs in for over a week now and have not experienced any of the symtoms you describe. The outlets sounded great from the get go ....

Dill thanks,
I did polish the copper romex ends with Simichrome(very similar to Flitz) and then cleaned that off with Cramolin and then wiped that off. I Didn't mess with the outlets other than wipeing them clean as I was not sure how the bare copper may react with something like ProGold in the long run. The outlets were quite free of any oxidation and I didn't want to create a big green mess that is that hard to get at and needs constant attention.The black stuff that comes off on the rag isn't all grundge. Some of what you see is part of a chemical reaction between the metal and the compound you are using. Flitz has a fine abrasive in it which like Simichrome removes a small amount of metal as you polish as well.
I am glad yours are sounding great already. Mine sounded great in so many ways right off, today was excelent other than what I mentioned before.

Drubin, I intended to burn mine in somewhere other than my system. I just decided I wanted to experience the changes as they took place. You could have the same experience that Dill is having and they sound great out of the box. I think that the worst may be over as they have sounded pretty smooth for a couple days in a row. I have to say the bass was a bit better today, as I had to back the sub level slightly off this afternoon from where I had it last night.

Day eleven.
Good news to report today. The bass is slowly developing back to its former self. The punch and weight are starting to return. I turned the sub back off once again this morning and it is almost back to the setting where it was prior to the installation of the outlets. Everything else sounds great today! There is an ease and pace that is unmistakeable. The detail is phenomenal without being bright or forward. There seems to be a sence of continousness(I think this may be something that HP,of The Absloute Sound, talked about at one point). By this, I mean that the space that instruments exist in is very distinct but the harmonics and ambient decay are able to flow freely and sort of intermingle and overlap in a way that they never have before. It fleshes out the soundstage and just makes it sound more life like. Sounds don't just die off, they float out and you can hear them seem to travel. In other words, WOW.
If it gets better now it will just be a bonus. When the bass fianlly gets back its former drive it will be complete!

Drubin, I would be concerned about running anything that gets hot 24/7. Don't want to burn the house down! That is a burn in you won't like! the fans seem to be doing the trick but it does take a while. Right now I feel like I am over the hump with the burn in. It may throw me a curve in a day or two, I will wait and see. So far it has been an adventure. But I am learning a lot in the process and I am sure it was a good move giving these a try!

listened to the outlets today for the first time and I must say I AM very impressed with the results. I have had them hooked up to my cable cooker for over a week (12) Day's and they sound great. The high's are extremely detailed and the bass seam's allot tighter and cleaner. Thanks Albert!!!!

Day twelve.
Today is much like yesterday. The bass is slightly firmer and deeper than even yesterday. I hope I am almost 1/2 way home. They are starting to sound great!

Btstrg, you lucky dog. A cable burner is a luxury item I don't have acess to. I am happy to hear your report and from what I am told only have another 2 weeks to a month to go. It seems like it has been longer than 12 days. I only plan to update daily for two more days, and after that only if things revert to back or when I hear a breakthrough or some reach some significant milestone.

The sad part is that when these fianaly settle in I will be jonesing for my next upgrade(power cords for the amp and pre-amp) fix. Perhaps a 12 step program is in order?