VPI Classic Motor Lubrication

Avoid Whale oil it is not politically correct and I image must have some off odors.

Get some of VPI's magic lube...it comes in a hypodermic looking injector gizmo. If there is any old crud on the bearing when you remove the platter, get rid of it with a towel. Put just a bit of that magic lube on the tip of the bearing. Put some Mobil 1, or the same stuff that VPI includes for damping the arm on the shaft and reinsert the platter...don't force it. Put a drop of what you are using on the shaft by the brass piece on top of the motor. Wipe off any slop you may have deposited there,....careful you don't put any on the shaft or the belt where they meet.

Thank you. A bit confused by your reply. VPI recommends lithium grease for the platter bearing. I wouldn't use that for the motor. What to use on the motor shaft is what I would like to know.

Thanks for your reply though.

40 weight motor oil is specified in the manual. Your suggested application method should work. I plan on squirting a couple drops of oil in the tight gap after a year of operation.