PsAudio 300?


From everthing that I have read; this sounds like one piece of very exciting equipment. Anybody out there have experience with this baby? The feedback I got from my Ps Audio UO post is not motivating me to go that way, but this, if found used, may do it for me. Show me the light! Please, first hand experience only. Thanks
whirshfield
I have owned a PowerPlant 300 for over a year now. When I bought it, I was a skeptic. I found it here at a good price, and figured I would try it, dislike it, and resell it. Here is is a year later, I am keeping it.

I run my CD Player and Pre on the PS-300, set to 90 Hz frequency, which seems to yield the best results. I do not have a fan or multiwave option, and I do not see the need for either. (The fan makes noise, I did not hear much difference on a PS300 that did have multiwave). My unit runs at about 110W output continously, and draws roughly 170 watts input, both meassured using a watt meter. So, your electric bill will be a touch higher. The unit gets, you guessed it, nice and warm. I have had more equipment plugged in, and just was not as happy with the results when the unit was running at 250W output; music seemed a bit less vibrant.

Another note, I run the unit at 90Hz output, which seems to yield best results with my CD player. However, there is a very slight audible buzz from the transformer in the CD player. (Very slight meaning: I put my ear on the CD player, I change the frequency from 60 to 90, and I hear the buzz become higher pitched and perceive it as being louder).

Overall, it made the quiet passages quiter, seemed to make the highs a little crisper, and the bass became a little tighter I think. They're small, but pleasing changes. I think I paid about $600 used for mine, and consider it well worth it.

Niels.
Mdomnick,
Try this link,
http://psaudio.com/articles/power_conditioners.asp
Scroll down a little over half way,two lines above:
Want more proof.

"Only the Power Plant,which uses AC regeneration can completely eliminate all noise and harmonics,repair clipped AC wave forms,regulate the voltage and provide a fully balanced AC signal to your equipment."
thats one of the big reason I did not go thru the trouble of demoing the Power Director...a lot of non descript sometimes conflicting info. I'm sure the 300 does a good job, but am happy with the Cinepro (or any other quality product of it's like).
My experience with PP Audio 300 Power plant is this; when using a tube pre-amp I had lots of noise (hum though the speakers). I never had any problems with fan noise . After swicthing to a solid state pre-amp totally dead quiet.