2. analog
  3. 1320593335

JMW 9 maybe likes to track carts lighter

I am finding out that I am getting better results with tracking my carts towards the lighter side of the recommended force of the cartridge with the JMW 9 Memorial. For instance, my Glider recommended force is between 1.8 and 2.0. I was tracking my Glider close to 2.0. I was just not right. Then down to 1.95, still hearing tracking error, but more air. I read that when you get tracking error that you should increase the tracking force. The manual actually says to track heavier to alleviate antiskate related performance issues. I was caught up with that for quite a while. Then I decided to try going lighter. Right now I am around 1.7 (little above) and it tracks great. My antiskate issues have decreased and the cart just tracks more accurately with tons more air, a lot less distortion, and a lot less innr groove distortion. So maybe depending on what the cartridge wants to see could mean more than just going heavier. Maybe I will keep this table and arm after all. If you have a JMW arm, you might be pleasantly suprised if you try this. I thought lighter would be worse, not better. I am always learning in this hobby.

I am using an old Shure tracking force gauge. I am wondering about the accuracy. I may get a digital gauge as I can see how critical this is.
tzh21y
stringreen's avatar
stringreen
6,467 posts
 
I doubt that the Dyna needs damping to improve it. Sure if the listener likes it like that ..fine, Too much damping closes in the sound. It is very easy to overdamp the VPI arm. Use only 1 small drop at a time, and listen to the changes. If the 1 drop does improve it, do a next drop, until it all goes south....remove the last 1 drop, and enjoy.
tzh21y OP
1,654 posts
 
How do you damp a JMW 9 arm? Mine does not have a reservior
audiofeil
4,011 posts
 
I think a better question is, how do you dump a JMW-9 arm?

YMMV
tzh21y OP
1,654 posts
 
lol. The arm does track better at the lighter setting with the Glider. Does a Mission Mechanic track better, yes, a Triplanar, probably.

If I had a thousand lps, I would get more serious about a better front end, but given my collection of about 500, this table is not bad. Not the best, not for $1800.00, thats for sure. Ever since I stopped using the defective H2, I have had an easier time living with the Scout and JMW 9. I would like to try a Basis with a Graham arm someday when I can afford it. The thing is a guy I know has this old table of about 25 years old that just is amazing to listen to. It is an old Mission 774 table with the arm that preceeded the Mechanic. I have never seen one come up for sale here.
stringreen's avatar
stringreen
6,467 posts
 
Regarding the Shure Bros. scale. If you weigh put the scale at the very beginning of the platter..with the front "feet" off the edge, it is remarkabley accurate.
More to discover