2. analog
  3. 1312052200

VPI 10.5i - Which armwands do I own?

Hi,

I do have 2 different VPI JMW 10.5i armwands.

apart from the different weight- 430 grams and 486 grams (without counter weights)- there are some additional differences which can be seen in the picture shown here:
http://i1137.photobucket.com/albums/n504/Helpho/Armwand105i.jpg

Pse help me to identify which armwands I have!!

Thanks vm in advance

Helmut
hatro
stringreen's avatar
stringreen
6,441 posts
 
You should use the off center rear counterweight to adjust azimuth. When adjusting, the bottom of the weight should be moved to the higher side.
dopogue
1,773 posts
 
Well sure, Stringreen, but that means every time you adjust VTF you have to RE-adjust azimuth .. and then readjust VTF ... etc. Much simpler to use the azimuth ring in the first place.
myles_b_astor's avatar
myles_b_astor
134 posts
 
Get the Soundsmith Counter Intuitive. It's the best $50 you can spend on the VPI and makes setting up VTF and VTA a snap instead of pulling one's hair out.
dopogue
1,773 posts
 
I have one, Myles. Trouble is, I have three arm tubes. Yeah, I know.
stringreen's avatar
stringreen
6,441 posts
 
I just changed my cartridge and in doing so, had to adjust that rear counterweight for azimuth alignment. The last time I had to do that was about 7 years ago when I last put in a cartridge. That azimuth ring as I read between the lines is something new...that it can indeed adjust azimuth. In the older aluminum arms,one of which I have,\... the proper way is for rotating the rear counterweight....not a big deal.
More to discover