Try the Ortofon 2M range. They are MM but sound very smooth and detailed. They are inexpensive, rugged and very very easy to set up, particularly if you dont have tools (but you will need a stylus gauge for any and all cartridges - but no worries, a free gauge and directions come with the Ortofon's.
VPI Setup - What Happened?
I moved.
Now that I'm settled in (ya right) I wanted to spin some vinyl. It's my birthday so I was treated to 6 new albums. I'm excited to hear them. But they won't play.
I cannot find my stylus gauge. My "little one" I'm betting "modified my settings which probably weren't all that good anyway. Point is, The tonearm just runs to the middle of teh album and all I get is distortion with a small amount of music buried within the distortion.
VPI Scoutmaster with a Dynavector MXV Mark II cart and JMW9 tonearm (or something like that).
I've checked the level and, as best I can without the aid of tools, alighned all the parameters which should have been good from the start. What bothers me is the amount of distortion I'm getting. Could something else be broken or does this sound like a completely hosed setup issue?
Tracking force? No real clue. Probably on the light side as I'm starting with 0 force and dialing the weight towards the cart.
Why does it constantly want to run toeards the finish line. I have the tonearm wire twisted in the proper direction so what gives?
Until I find my feeble stylus guage, I'd just like to know that there's still health with my table.
Oh ya, PS Audio phono stage. Drives through an Allnic L3000 pre which gives blessings to a Pass X350.5.
Now that I'm settled in (ya right) I wanted to spin some vinyl. It's my birthday so I was treated to 6 new albums. I'm excited to hear them. But they won't play.
I cannot find my stylus gauge. My "little one" I'm betting "modified my settings which probably weren't all that good anyway. Point is, The tonearm just runs to the middle of teh album and all I get is distortion with a small amount of music buried within the distortion.
VPI Scoutmaster with a Dynavector MXV Mark II cart and JMW9 tonearm (or something like that).
I've checked the level and, as best I can without the aid of tools, alighned all the parameters which should have been good from the start. What bothers me is the amount of distortion I'm getting. Could something else be broken or does this sound like a completely hosed setup issue?
Tracking force? No real clue. Probably on the light side as I'm starting with 0 force and dialing the weight towards the cart.
Why does it constantly want to run toeards the finish line. I have the tonearm wire twisted in the proper direction so what gives?
Until I find my feeble stylus guage, I'd just like to know that there's still health with my table.
Oh ya, PS Audio phono stage. Drives through an Allnic L3000 pre which gives blessings to a Pass X350.5.
- ...
- 11 posts total
- 11 posts total